ˆOperation
VOLUME — Set to LO to hear a medium volume through the handset or to HI for a louder handset volume.
FLASH — Use to perform the switchhook operation for special services, such as Call Waiting.
For example, if you have Call Waiting, press FLASH to take an incoming call without disconnecting the current call. Press FLASH again to return to the first call.
Notes:
If you do not have special phone services, pressing FLASH might disconnect the current call.
When CONF is pressed, FLASH has no function
REDIAL — To dial the last num- ber dialed, lift the handset. When you hear the dial tone, press REDIAL. The phone dials the last number dialed.
RESET — At the end of a call, you can make your next call without placing the handset in the cradle. Press RESET to hang up the cur- rent call, then dial the next number. Note: When CONF is pressed, RE- SET has no function
LINE 1 and LINE 2 — Press the line button to se- lect a line, then lift the handset and dial the number. When you receive a call, that line’s indicator flashes rapidly until the line stops ringing. To answer the call, press the corresponding line button (LINE 1 or LINE 2), then lift the handset.
To end a call, hang up the handset.
HOLD — Press to place a call on hold. The line indicator flashes slowly. To return to the call, press its line button or pick up a parallel phone.
Note: Pressing another line button without pressing HOLD disconnects the current call.
8 | Operation |