4.Repeatedly press or hold down MINUTE/TWO WAY until you hear the correct minute.
Note: When you hold down MINUTE/TWO WAY, the system moves forward in 10 minute intervals until it reaches 00.
5.Release TIME/SKIP. The system announces the day and time you set.
To hear the current day and time, press TIME/SKIP while the system is on or off.
If you have not set the day and time and you press TIME/SKIP, the system announces “Please set time”.
SETTING THE INCOMING MESSAGE LENGTH
Slide INCOMING MSG on the back of the system to 1 or 5 MIN (minutes) to choose the length of incoming messages.
When you slideto(announcement only), the system plays your outgoing message, but the caller cannot record a message. After the system answers, it monitors the line for 10 seconds for any remote code entry.
RECORDING THE OUTGOING MESSAGE (OGM)
You can use the system’s prerecorded outgoing message, “Hello, please leave a message after the tone,” or record your own.
To record an outgoing message:
10 | Preparation |