5757 Equinox 1200 UG 28/5/04 10:32 am Page 59
BT Equinox 1200 – Edition 6 – 28.05.04 – 5757
| Base settings | 59 | |
|
|
|
|
Handset priority | Connecting to a |
| |
Normally, if you have more than one handset registered | switchboard/PBX? |
| |
For Access code, Recall and Dial |
| ||
to your base, they all ring at the same time. However, you | mode settings see, Connecting to |
| |
a switchboard, page 78. |
| ||
can set one of them to ring before the others, so that calls |
| ||
|
|
| |
can always be answered at one handset first. |
|
|
|
1.Press MENU then scroll 
to Base Settings and press OK. Press 
to highlight Handset Priority then press OK.
Display highlights All Handsets. Press OK to select All
Handsets to make all handsets ring together. Or
2.Scroll 
to Select Handset and press OK. Scroll 
or
to the handset you want to ring first. Press OK.
3.Scroll 
or 
to select the number of rings at the handset before the other handsets start ringing. Press OK to confirm.
Dial mode
Your BT Equinox 1200 is set to Tone dialling. You can switch to Pulse dialling.
1.Press MENU then scroll to Base Settings and press OK. Scroll 
to Dial Mode and press OK.
2.Press 
or 
to highlight Pulse or Tone and press OK to confirm.