WALL MOUNT INSTALLATION
Because it is necessary to cradle the handset for 12 hours prior to connecting it for use the first time, it is better to leave the unit on a flat surface during inital charge before attempting to hang it on the wall.
1.Plug the power supply cord into the base and into an AC outlet.
2.Place the handset in the base.
Allow phone to charge for 12 hours before using the first time. The CHARGE/IN USE light comes on. If you don’t charge the handset battery properly (for 12 hours) when you first set up the phone, the battery’s performance will be compromised.
3.After charging, plug the short telephone line cord into the phone jack on the back of the unit and then to the wall jack.
4.Attach the wall mount bracket by inserting the two tabs at the top and then snapping the tab at the bottom into place.
5.Slip the mounting holes over the wall plate posts and slide the unit down firmly into place. (Wall plate not included.)
1
2
3 5
4
NOTE: Use only the Thomson power supply #
7