STD150_AU_Ed01.qxd 26/11/04 12:00 Page 8
2. CONFIGURING THE BASE'S LINES
You can configure the base's lines according to your requirements.
2.1LINE PRIORITY
You have the following options for managing the outgoing calls for each hand- set:
-Alternative (Line 1 or Line 2): default setting
-Line 1 First: line 1 takes priority and if this line is busy, line 2 will be used
-Line 2 First: line 2 takes priority and if this line is busy, line 1 will be used
-Line 1 Only (line 1): line 1 authorized and no access to line 2
-Line 2 Only (line 2): line 2 authorized and no access to line 1
-No Ext (internal calls only)
This line priority has no effects on the reception of incoming calls.
lPress 
to enter the menu.
lSelect "BS Setting" and press 
to confirm.
lEnter the "MASTER PIN:" 1590 (default) and press 
to confirm.
lSelect "Select Line" and press 
to confirm.
lUse the direction keys to choose the handset you want from the list and
press 
to confirm (HS 1 = handset 1).
lChoose the line priority from the 6 options given above and press 
to confirm.
2.2CHOOSING THE RINGING GROUP
Each handset may receive a call on line 1 and/or line 2.
For example, you may decide that handsets 1, 3 and 5 will be associated with line 1 and ring on line 1 and that handsets 2 and 4 will be associated with line 2 and ring on line 2.
lPress 
to enter the menu.
lSelect "BS Setting" and press 
to confirm.
lEnter the "MASTER PIN:" 1590 (default) and press 
to confirm.
8