WALL MOUNT INSTALLATION
1.Install the base plate by putting the tabs into the slots on the top of the unit first, and then snapping the bottom tabs into place.
2.Plug one end of the short tele- phone line cord into the jack marked PHONE LINE on the back of the unit, and plug the other end into a modular wall jack.
3.Connect the power supply adapter to the POWER 9V DC jack on the back of the unit, and plug it into an AC outlet.
4.Slip the mounting holes over the wall plate posts and slide the unit down firmly into place. (Wall plate not included.)
5.Set the TONE/PULSE switch to TONE if you have
6.Turn on the RINGER switch so the handset rings for incoming calls.
7.Place handset in the base to charge for 12 hours. The CHARGE/ IN USE light comes on indicating that the battery is charging.
1
2
4
3
5
6
PHONECHANNEL
1 | ABC 2 | DEF 3 |
| PAGE / FIND |
|
| |||
GHI 4 | JKL 5 | MNO6 | 7 |
|
|
|
| CHARGE | |
PRS 7 | TUV 8 | WXY 9 |
| IN USE |
* | OPER0 | # |
|
|
TONE |
|
| ||
VOLUME | MEMORY | REDIAL |
|
|
RINGER | FLASH |
|
| |
OFF | ON |
|
|
|
4