GE 28321 manual Firmware Updates, Transfering a Call

Operating Your Phone 13

NOTE: It will take several minutes install new software. During this time you will not be able to use your phone.

NOTE: The software upgrade from the network is split into two sequences. At the end of the second sequence, the base will reboot and finish software update. The Power and Ethernet LED will be steady on.

Transfering a Call

You can transfer a call to another handset. 1. During a regular telephone call, press

and your call is put on hold. Enter the handset number you want to join on the call (1-5).

2.When the other handset answers inform them they have a call, then press

. The call is then transferred. If the other handset does not answer or you decide not

to transfer the call, press to cancel and resume the call.

3.Press to end the call.

Firmware Updates

Your phone has the capability to receive Handset and Base firmware upgrades.

1.When new firmware is available, the handsets will display a New Firmware Available screen, which will ask the user if they want to perform an update.

2.You will have the option to download firmware immediately or wait until later.

3.To down load the new firmware simply follow the prompts in the handset screen.

4.During the software update the base LED’s will flash alternately with Power & Ethernet. The handset will display firmware update in process in the screen.

5.A firmware update notification is also displayed on the handset with specific screen and message when process is complete.