GE Feb-74 manual Wall Mount Installation

Page 7

WALL MOUNT INSTALLATION

Because it is necessary to cradle the handset for 12 hours prior to connecting it for use the first time, it is better to leave the unit on a flat surface during inital charge before attempting to hang it on the wall.

1.Plug the power supply cord into the base and into an AC outlet.

2.Place the handset in the base.

Allow phone to charge for 12 hours before using the first time. The CHARGE/IN USE light comes on. If you don’t charge the handset battery properly (for 12 hours) when you first set up the phone, the battery’s performance will be compromised.

3.After charging, plug the short telephone line cord into the phone jack on the back of the unit and then to the wall jack.

4.Attach the wall mount bracket by inserting the two tabs at the top and then snapping the tab at the bottom into place.

5.Slip the mounting holes over the wall plate posts and slide the unit down firmly into place. (Wall plate not included.)

1

2

3 5

4

NOTE: Use only the Thomson power supply # 5-2429 that is compatible with this unit. Using other adapters may damage the unit.

7

Image 7
Contents We bring good things to life Interference Information Important InformationHearing AID Compatibility Table of Contents Digital Security System IntroductionMake sure your package includes the items shown here Installation and SetupDesktop Installation Wall Mount Installation Volume Telephone SetupEnter Setting the Area Code for Caller IDTo Make a Call from the Handset Telephone OperationTo Make a Call AT the Base Unit To Receive a Call AT the Base UnitAuto Standby Distinctive RingAutomatic Redial Mute Fast RedialChannel Intercom Temporary ToneTo Activate Intercom Flash FlashUsing the Speakerphone Receiving a Call Answering and Placing CallsReceiving and Storing Calls Caller ID OperationReviewing Messages 234 567Deleting Caller ID Records Dialing a Caller ID NumberDeleting ALL Caller ID Records Call Waiting with Caller ID Special FeaturesStoring Names and Numbers Memory Press the Flash button on the handset or Number For Very Important Person VIP Feature Voice Messaging Erase Call ID? appears in the display. Press Delete againCaller ID Error Message IndicatorsGeneral Product Care Caller ID Troubleshooting TipsCall Waiting Telephone Page REN Number Telephone Network Information Causes of Poor ReceptionReplacing the Battery $9.95 Accessory Order FormPage Index Very Important Person VIP Feature Purchase Date Name of Store ServiceModel Rev E/F