GE 28213 Series Vmwi / Visual Ringer Indicator on Handset, Speakerphone Operation, Making a Call

Handset

The TALK/SPEAKER indicator buttons flash when you receive a call and remain lit during a call.

The keypad and CID will also light when a call is received.

VMWI / Visual Ringer Indicator on Handset

IMPORTANT: In order to use this unit’s Voice Mail Waiting Indicator (VMWI) feature, you must subscribe to this service from your phone company.

The VMWI indicator on the top of the handset flashes when you receive a new message from your service provider. Also, it serves as a Visual Ringer function. It will flash when there is an incoming call.

Speakerphone Operation

NOTE: If you are using the speakerphone, remain close to handset so the party you are speaking to can hear you.

If you are using the earpiece and want to switch to the speakerphone, press the TALK/SPEAKER button, press END button to end conversation.

If you are using the speakerphone and want to switch to the earpiece, press the TALK/SPEAKER button again, press END button again to end conversation.

Making a Call

1.Press the TALK/SPEAKER button. Dial the desired number.

-OR -

Dial the number first, then press the TALK/SPEAKER button. - OR -

Press the caller ID-volume(5 or 6) button to select the desired record, then press the TALK/SPEAKER button.

2.When finished, press the END button to hang up.

NOTE: You may enter up to 28 pre-dial digits.

NOTE: If you want to delete the pre-dial number you entered, press the delete/int/conf button until all of the digits are erased.

23