Plantronics T20 Plug in the long phone cord, Place, Your JB-20is ready to use, Desk Mounting

Page 6

CHAPTER 4 INSTALLATION

Desk Mounting

1.Plug in the long phone cord.

2.Plug the handset cord into the telephone.

Wall Mounting

1.Pull the handset hook out and reverse its position so that the hook points up.

	Fig. 4 - Reversing the hook
	2. Install the Base Plate by
	sliding the small tabs
	into the upper slots. Push
	on the bottom of the Base
Fig.3 - Connections and installation	Plate until it snaps into
	place.

3.Lift the handset and listen for a dial tone.

4. Your JB-20is ready to use.

MANUAL

AUTO

Fig. 5 - Phone base installation for wall mounting

4

Image 6

Contents JB-20 Important Safety Instructions Contents Package includes the items as shown below Warranty ServicePlease make sure your Sales ReceiptProg Control volumeButton Ringer ToneYour JB-20is ready to use Plug in the long phone cordPlace Desk MountingVolume HandsetAdjust the Ringer HoldTo return to your call, pick up the handset Button again ButtonsPress Hang up the handsetMemory Connecting the speech processor Direct Audio OutputCochlear Implant Adapter Cord Symptom Cause Corrective Action JB-20,go throughPart 68 of FCC Rules Information Do not Disassemble this Equipment Part 15 of FCC Rules Information Industry Canada Technical Specifications Chapter FCC Information Chapter Warranty Physical Dimensions Decibel GainVoice 800 TTY 800