BEFORE YOU BEGIN
This section gives you all of the information you need to know to install and set up your phone.
PARTS CHECKLIST
Your package should contain the following items:
| LOWER | SPEAKER | ABR LOW |
30 MEMORY |
| SPEAKER PHONE | |
| STORE | LOWER |
|
FLASH | PAUSE | BUSY/REDIAL | ALARM REDIAL |
| 1 | ABC2 | DEF 3 |
| GHI 4 | JKL5 | MNO6 |
| PQ | TUV8 | WX |
| RS 7 | YZ 9 | |
| * | 0 | # |
|
| OPER |
|
| TONE |
|
|
| MUTE |
| HOLD |
SPEAKER
Handset cord | Telephone line cord | Handset | Base unit |
MODULAR JACK REQUIREMENTS
You need an RJ11 type modular jack, which is the most common type of phone jack and might look like the one pictured here. If you don’t have a modular jack, call your local phone company to find out how to get one installed.
GLOSSARY OF TERMINOLOGY USED IN THIS MANUAL
Hook switch. The part of the phone that pops up to activate the phone line when the handset is lifted from the base.
Indicator lights. The light located next to each of the function buttons; it shows you the status of each button (MUTE, SPEAKER, HOLD).
2