GE 2-931SST manual Desktop Installation

DESKTOP	6	4
INSTALLATION

5

1

3

2

TONE/PULSE switch

1.Plug the power supply cord into the 9V DC jack on the base and into an AC outlet.

2.Set the TONE/PULSE switch to TONE for touch-tone service, or PULSE for rotary service. If you don’t know which type of service you have, check with the phone company.

3.Raise the base antenna.

4.Select RINGER ON or OFF (on the side of handset). When you select OFF, the handset doesn’t ring.

5.Place handset in the base to charge for 12 hours. The CHARGE/IN USE light comes on to indicate that the battery is charging.

If you don’t charge the handset battery properly (for 12 hours) when you first set up the phone, the battery’s long-term performance will be compromised.

6.Plug the telephone line cord into the PHONE LINE jack on the back of the base and into a modular jack.

NOTE: Use only the AC power adapter (5-4083) that came with this unit. Using other adapters may damage the unit.

7