Connect to Your Phone, Ready | Plantronics ML12, ML10 specs

CONNECT TO YOUR PHONE

“Pairing” is the set-up process of introducing your headset to your phone.

Before using your headset for the first time, you must pair it with your Bluetooth- enabled phone.

Pairing is a one-time process unless your phone loses the connection or you want to pair a new phone.

Activate the Bluetooth feature on your phone, then get phone to add/search/discover new Bluetooth devices.

Phones have different menus to select from:

iPhone: Settings > General > Bluetooth > On

(starts the search for devices)

BlackBerry® smartphone: Settings/options > Bluetooth: On > Search for devices

First time, right out of the box:

With headset turned off, activate Bluetooth pairing mode by sliding Power switch on. The LED flashes red/blue to indicate pairing mode.

Pairing new phone/ reconnecting original:

With headset turned off, slide Power switch on. Press and hold the Call button until the LED flashes red/blue.

Select “PLT_MLXX” from the list of Bluetooth devices shown on your phone.

If phone asks for a passcode, enter four zeros (0000). You may see **** on screen. Some phones also ask to confirm headset connection after pairing.

Headset LED will stop flashing red/blue once your phone and headset are successfully paired/ connected.

You can now make a call using your phone’s keypad or voice- dialing feature.