Intel DX48BT2 manual Regulatory Compliance, Contents

			Contents
	Configuring for External RAID Using Marvell* Storage Technology		69
		Configuring the BIOS	69
		Creating Your RAID Set	69
		Loading the Marvell Storage Technology RAID Drivers and Software	69
A	Error Messages and Indicators
	BIOS Beep Codes		71
	BIOS Error Messages		71
B	Regulatory Compliance
	Safety Standards		73
		Place Battery Marking	73
	European Union Declaration of Conformity Statement		74
	Product Ecology Statements		75
		Recycling Considerations	75
		Lead-free 2LI/Pb-free 2LI Board	78
		Restriction of Hazardous Substances (RoHS)	79
		EU RoHS	79
		China RoHS	80
	EMC Regulations		82
		Ensure Electromagnetic Compatibility (EMC) Compliance	83
	Product Certifications		84
		Board-Level Certification Markings	84
		Chassis and Component Certifications	85
Figures
	1.	Desktop Board DX48BT2 Components	11
	2.	LAN Connector LEDs	16
	3.	Location of the Standby Power Indicator	22
	4.	Onboard Power Button	24
	5.	Location of the VR and CPU LEDs	25
	6.	Installing the I/O Shield	29
	7.	Desktop Board DX48BT2 Mounting Screw Hole Locations	30
	8.	Lift the Socket Lever	31
	9.	Lift the Load Plate	32
	10.	Remove the Protective Socket Cover	32
	11.	Remove the Processor from the Protective Processor Cover	33
	12.	Install the Processor	33
	13.	Close the Load Plate	34
	14.	Connecting the Processor Fan Heat Sink Cable to the Processor Fan Header	35
	15.	Installing the ICH Heat Sink Decorative Cover	36
	16.	Installation of a Typical MCH Heat Sink Fan	37
	17.	Dual Channel Memory Configuration with Two DIMMs	38
	18.	Dual Channel Memory Configuration with Four DIMMs	39
	19.	Dual Channel Memory Configuration with Three DIMMs	39
	20.	Use DDR3 DIMMs	40
	21.	Installing a DIMM	41
	22.	Installing PCI Express x16 Graphics Cards	43
	23.	Installing a PCI Express x16 Card	44
	24.	Removing a PCI Express x16 Card	45

vii