Intel D945PVS manual Intended Audience, Use Only for Intended Applications, Information Layout

Page 3

Preface

This Product Guide gives information about board layout, component installation, BIOS update, and regulatory requirements for Intel® Desktop Board D945PVS.

Intended Audience

The Product Guide is intended for technically qualified personnel. It is not intended for general audiences.

Use Only for Intended Applications

All Intel desktop boards are evaluated as Information Technology Equipment (I.T.E.) for use in personal computers (PC) for installation in homes, offices, schools, computer rooms, and similar locations. The suitability of this product for other PC or embedded non-PC applications or other environments, such as medical, industrial, alarm systems, test equipment, etc. may not be supported without further evaluation by Intel.

Information Layout

The chapters in this Product Guide are arranged as follows:

1Desktop Board Features: a summary of product features

2Installing and Replacing Desktop Board Components: instructions on how to install the desktop board and other hardware components.

3BIOS: instructions on how to update the BIOS

4Configuring for RAID (Intel® Matrix Storage Technology) Requires Microsoft Windows* XP or 2000 and SATA Hard Drive(s): instructions on how to configure the system for RAID

AError Messages and Indicators: information about BIOS error messages and beep codes

BRegulatory Compliance: safety and EMC regulations, product certification

Conventions

The following conventions are used in this manual:

CAUTION

Cautions warn the user about how to prevent damage to hardware or loss of data.

NOTE

Notes call attention to important information.

iii

Image 3
Contents Intel Desktop Board D945PVS Product Guide Disclaimer Revision Revision History DateFCC Declaration of Conformity Canadian Department of Communications Compliance StatementConventions Intended AudienceUse Only for Intended Applications Information LayoutTerminology Box ContentsContents Bios Regulatory Compliance ContentsTables Form Factors Feature SummarySupported Operating Systems BiosDesktop Board Components Desktop Board FeaturesLabel Description Power Supply Requirements Platform Compatibility Guide Power Supply RequirementsProcessor Main Memory Intel 945P Express Chipset Graphics SubsystemAudio Subsystem LAN Subsystem Software RJ-45 LAN Connector LEDsInput/Output I/O Controller LAN SubsystemSerial ATA RJ-45 10/100/1000 Gigabit Ethernet LAN Connector LEDsHi-Speed USB 2.0 Support Enhanced IDE InterfaceExpandability Serial ATA and IDE Auto ConfigurationPCI and PCI Express Auto Configuration Security PasswordsChassis Intrusion Power Management FeaturesPower Connectors Fan ConnectorsSuspend to RAM Instantly Available PC Technology Location of Standby Power IndicatorBattery SpeakerReal-Time Clock Intel Desktop Board D945PVS Product Guide Before You Begin Installing and Replacing Desktop Board ComponentsInstallation Precautions Installation InstructionsEnsure Electromagnetic Compatibility EMC Compliance Chassis and Component Certifications Prevent Power Supply OverloadPlace Battery Marking Installing and Replacing Desktop Board ComponentsUse Only for Intended Applications Installing the I/O ShieldDesktop Board D945PVS Mounting Screw Hole Locations Installing and Removing the Desktop BoardInstalling a Processor Installing and Removing a ProcessorRemove the Protective Socket Cover Install Processor Installing the Processor Fan Heat Sink Connecting the Processor Fan Heat Sink CableRemoving the Processor Installing and Removing Memory Guidelines for Dual Channel Memory Configuration512 MB, 533 MHz 256 MB, 533 MHz Installing a Dimm Installing DIMMsRemoving DIMMs Installing and Removing a PCI Express x16 Card Installing a PCI Express x16 CardRemoving the PCI Express x16 Card Connecting the IDE Cable Connecting the IDE CableConnecting the Serial ATA Cable Connecting the Serial ATA Sata CableItem Description Connecting Internal HeadersPin Signal Name AC ’97 Audio Header Signal NamesConnecting USB 2.0 Headers Connecting Ieee 1394a HeadersConnecting the Front Panel Header Connecting the Rear Panel USB 2.0 and Ieee 1394a Adapters Installing the Rear Panel USB 2.0 and Ieee 1394a AdaptersConnecting the Front Panel USB/IEEE 1394a/Audio Cables Installing the Front Panel USB/IEEE 1394a/Audio SolutionConnecting Fan Cables Connecting Fan and Power CablesConnecting 2x12 Power Supply Cables Connecting Power Supply CablesLocation of Other Connectors on Desktop Board D945PVS Other ConnectorsSetting the Bios Configuration Jumper Jumper Settings for the Bios Setup Program ModesJumper Setting Mode Description Clearing Passwords Précaution Replacing the BatteryAvvertimento Awas Oсторога Removing the Battery Intel Desktop Board D945PVS Product Guide Bios Updating the Bios with the Iflash Memory Update Utility Obtaining the Bios Update FileUpdating the Bios Recovering the Bios Intel Desktop Board D945PVS Product Guide Creating Your RAID Set Configuring the Bios for Intel Matrix Storage TechnologySetting Up a RAID Ready System Beep Codes Bios Beep CodesBios Error Messages Bios Error MessagesIntel Desktop Board D945PVS Product Guide Regulation Title Safety RegulationsSafety Regulations European Union Declaration of Conformity StatementIntel Desktop Board D945PVS Product Guide Product Ecology Statements Recycling ConsiderationsRegulatory Compliance Français Russian Lead-Free Board Markings Lead-Free Desktop BoardEMC Regulations EMC RegulationsProduct Certification Markings Product Certification Markings Board Level