NETGEAR ME103 manual Authentication. Circle one Open System or Shared Key

Page 35

Reference Manual for the ME103 802.11b ProSafe Wireless Access Point

Information to Gather Before Changing Basic Wireless Settings

Before customizing your wireless settings, print this form and record the following information. If you are working with an existing wireless network, the person who set up or is responsible for the network will be able to provide this information. Otherwise, you will choose the settings for your wireless network. Either way, record the settings for your wireless network in the spaces below.

•Wireless Network Name (SSID): ______________________________ The SSID, identifies the wireless network. You can use up to 32 alphanumeric characters. The SSID is case sensitive.

Note: The SSID in the wireless adapter card must match the SSID of the wireless access point. In some configuration utilities (such as in Windows XP), the term “wireless network name” is used instead of SSID.

•Authentication. Circle one: Open System or Shared Key.

Authentication is unrelated to encryption of data transmissions. Shared Key provides more network access security.

Note: If you select Shared Key, the other devices in the network will not connect unless they are set to Shared Key as well and are configured with the correct key.

•WEP Encryption key size. Choose one: 64-bitor 128-bit. 128-bit provides stronger data security. Again, the encryption key size must be the same for the wireless adapters and the wireless access point.

•Data Encryption (WEP) Keys.

There are two methods for creating WEP data encryption keys. Whichever method you use, record the key values in the spaces below.

–Passphrase method. ______________________________ These characters are case sensitive. Enter a word or group of printable characters. When you enter the Passphrase and click the Generate Key button on the ME103, the keys will be generated.

–Manual method. These values are not case sensitive. For 64-bit WEP, enter 10 hex digits (any combination of 0-9 or a-f). For 128-bit WEP, enter 26 hex digits.

Key 1: ___________________________________

Key 2: ___________________________________

Key 3: ___________________________________

Key 4: ___________________________________

Use the procedures described in the following sections to configure the ME103. Store this information in a safe place.

Basic Installation and Configuration

3-14

August 2003

Page 34 Page 36
Image 35
Page 34 Page 36
Contents August Technical Support RF Exposure Requirements EN 55 022 Declaration of Conformance Radio Frequency Interference RequirementsRegulatory Compliance Information 0470 August Contents Chapter Maintenance Appendix a Specifications Glossary Index Scope Manual SpecificationsChapter About This Manual AudienceSpecial Message Formats Typographical ConventionsHtml version of this manual How to Use the Html Version of this ManualHow to Print this Manual Chapter Introduction About the ME103 802.11b ProSafe Wireless Access PointSupported Standards and Conventions Key Features802.11b Standards-based Wireless Networking Compatible and Related Netgear Products System RequirementsAutosensing Ethernet Connections with Auto Uplink Hardware Description What’s In the Box?ME103 front panel ME103 Wireless Access Point Front PanelME103 rear panel ME103 Wireless Access Point Rear PanelObserving Placement and Range Guidelines Chapter Basic Installation and ConfigurationCabling Requirements Feature Factory Default Settings Default Factory SettingsUnderstanding ME103 Wireless Security Options SET UP the ME103 Access Point Installing the ME103 802.11b ProSafe Wireless Access PointConfigure LAN and Wireless Access Verify Wireless Connectivity Example ME103 NetBIOS name in browser address bar How to Log In to the ME103 Using Its Default NetBIOS NameWeb browser will then display the ME103 home How to Log In to the ME103 Using Its Default IP Address Basic Wireless Settings menu Understanding Basic Wireless SettingsBasic Wireless Security options Understanding Basic Wireless Security OptionsField Description Network Authentication. Circle one Open System or Shared Key How to Set Up and Test Basic Wireless Connectivity 10 Wireless Card Access List Setup How to Restrict Wireless Access by MAC AddressHow to Configure WEP 11 Basic IP Settings Menu Using the Basic IP Settings OptionsAccess Point Name NetBIOS Viewing General, Log, Station, and Statistical Information Chapter MaintenanceGeneral Information Fields Field Description Access Point InformationStatistics Field Description System Up Time Statistics FieldsActivity Log screen Activity LogInformation Station List of associated devices Viewing a List of Attached DevicesME103 Upgrade menu Upgrading the Wireless Access Point SoftwareSettings Backup menu Configuration File ManagementUsing the Reset Button to Restore Factory Default Settings Saving and Retrieving the ConfigurationRestoring the ME103 to the Factory Default Settings Set Password menu Changing the Administrator PasswordBasic Requirements for Chapter Advanced ConfigurationConfiguring Advanced Security 802.1x Options Key Exchange Configuration Worksheet How to Configure the 802.1x Key Exchange OptionAdvanced Configuration Request a certificate View the ME103 log and check the connection Running a Ping test from Windows Ping test results Advanced Wireless Settings screen Understanding Advanced Wireless SettingsField Description Operating Mode Advanced Wireless Settings FieldsHow to Configure a ME103 as a Point-to-Point Bridge Configuring Wireless Operating Modes10 Multi-Point bridging How to Configure MultiAdvanced Configuration Antenna Installation EAP-TLS Configuration Worksheet Blank Configuration WorksheetNo lights are lit on the access point Chapter TroubleshootingLAN light is not lit Wireless LAN activity light does not light upWhen I enter a URL or IP address I get a timeout error Am using EAP-TLS security but get disconnectedCannot connect to the ME103 to configure it Using the Reset Button to Restore Factory Default Settings Specifications for the ME103 Appendix a SpecificationsSpecifications Infrastructure Mode Appendix B Wireless Networking BasicsWireless Networking Overview Network Name Extended Service Set Identification Essid Authentication, WEP, and WPAAd Hoc Mode Peer-to-Peer Workgroup Open System Authentication Authentication802.11b Authentication Open System Steps 802.11b Authentication Shared Key Steps Key Size WEP Configuration Options Wireless ChannelsTable B-1 802.11b Radio Frequency Channels Radio frequency channels used are listed in Table B-1Understanding 802.1x Port Based Network Access Control Wireless Networking Basics Wireless Networking Basics Wireless Networking Basics Basic Router Concepts Appendix C Network, Routing, Firewall, and Cabling BasicsIP Addresses and the Internet What is a Router?Class E Class E addresses are for experimental use Subnet Addressing NetmaskExample of Subnetting a Class B Address Netmask Formats Netmask Notation Translation Table for One OctetPrivate IP Addresses Single IP Address Operation Using NATSingle IP Address Operation Using NAT IP Configuration by DhcpRouting Protocols Domain Name ServerMAC Addresses and ARP Internet Security and FirewallsStateful Packet Inspection What is a Firewall?Denial of Service Attack Ethernet Cabling Uplink Switches, Crossover Cables, and MDI/MDIX SwitchingUTP Ethernet cable wiring, straight-through Cable Quality Network, Routing, Firewall, and Cabling Basics Preparing Your Computers for TCP/IP Networking Appendix D Preparing Your PCs for Network AccessConfiguring Windows 98 and Me for TCP/IP Networking Install or Verify Windows Networking ComponentsPreparing Your PCs for Network Access Choose Settings, and then Control Panel Enabling Dhcp to Automatically Configure TCP/IP SettingsPrimary Network Logon is set to Windows logon Verifying TCP/IP Properties Selecting Windows’ Internet Access MethodConfiguring Windows 2000 or XP for TCP/IP Networking Dhcp Configuration of TCP/IP in Windows XP TCP/IP details are presented on Support tab Right click on Local Area Connection and select Properties Dhcp Configuration of TCP/IP in WindowsObtain an IP address automatically is selected Verifying TCP/IP Properties for Windows XP or Preparing Your PCs for Network Access Glossary DMZ DSL Internet service provider Radius TLS Wins Glossary Numerics IndexRFC
Related manuals
Manual 2 pages 53.25 Kb

ME103 specifications

The NETGEAR ME103 is a versatile and reliable Wireless Access Point designed to extend the reach of your network while providing enhanced connectivity for various devices. Ideal for both home and small office environments, the ME103 is an essential component for those seeking to improve wireless performance without compromising on speed or stability.

One of the main features of the NETGEAR ME103 is its compatibility with numerous wireless standards. It supports the 802.11b and 802.11g protocols, allowing users to connect a wide range of wireless devices, including laptops, smartphones, and tablets. This compatibility ensures that the ME103 can seamlessly integrate into existing networks, making it a flexible solution for upgrading Wi-Fi coverage.

The ME103 is equipped with fast data transfer rates, reaching up to 54 Mbps in 802.11g mode. This speed is sufficient for most online activities, including streaming videos and online gaming, providing users with a smooth and uninterrupted experience. Its ability to function as both an access point and a bridge allows for increased versatility, enabling connectivity between wired and wireless devices.

In terms of security, the NETGEAR ME103 has built-in features that protect your network from unauthorized access. It supports Wired Equivalent Privacy (WEP) and Wi-Fi Protected Access (WPA) encryption protocols, ensuring that data transmitted over the network remains secure. Additionally, it includes a built-in firewall that further safeguards against potential threats.

The device is also equipped with an easy-to-use web interface for configuration, making it simple for users to set up and manage their network settings. Its compact design allows for flexible placement options, whether mounted on a wall or placed on a desk. This adaptability is crucial for optimizing wireless coverage in larger spaces.

Power over Ethernet (PoE) support is another significant characteristic of the ME103, which simplifies installation by allowing the device to receive power through the Ethernet cable, eliminating the need for an additional power source.

Overall, the NETGEAR ME103 stands out due to its high compatibility, solid performance, and ease of use, making it an excellent choice for users looking to enhance their wireless connectivity efficiently.
Top Page Image Contents