WEP Encryption, WEP Select, None | ZyXEL Communications 2000W

Prestige 2000W Quick Start Guide

3.1.2 WEP Encryption

WEP (Wired Equivalent Privacy) encryption scrambles all communication transmitted between the Prestige and the AP to keep network communications private. Do the following if you were given a WEP key to use, otherwise skip to Section 3.1.3 on page 8.

1Use the up or down arrow and the Left key to select WEP Select.

2Select the same length of WEP keys as the AP (64-bit or 128-bit).

3Select a WEP key to configure.

4The WEP key must be the same as on the AP. Use the left arrow button to clear the default text. Use the up and down arrows to select the type of characters. Enter the WEP key. Use the Left key to select Ok when you are done.

If you chose 64-bit WEP, then enter 5 ASCII characters or 10 hexadecimal characters ("0-9", "A-F").

If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal characters ("0-9", "A-F").

5You can configure up to four WEP keys (in the same manner as the first) but only one key can be selected (enabled) at any one time.

6.WEP Select

7.Profiles

8.Auth Type

SelectBack

[1]None

[2]64bit

[3]128bit

SelectBack

7.WEP key 1

8.WEP key 2

9.WEP key 3

SelectBack

WEP key 1

**********

Ok Aa1@ Clear

8.WEP key 2

9.WEP key 3

10.WEP key 4

SelectBack

VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560