T A L K S W I T C H Q U I C K G U I D E |
| CONNECTING PHONES AND DEVICES |
CONNECTING PHONES |
| WHAT WILL MY PHONE SYSTEM DO? |
! |
| |
AND DEVICES | Default Equipment Settings: | |
C T .T S 0 0 5 . 5 0 5 . E N – 0 3 | Simply connect the Talkswitch to your phone system (as shown below). Your phone | |
| system will do the following: | |
|
| |
|
| • An incoming call on any line will ring all local extensions. |
|
| • A receptionist can manually transfer calls to local extensions or voicemail. |
|
| • Every local extension gets a voicemail box. |
|
| • Extension 114 (E4) works during a power failure. |
|
| Additional Call Handling Capabilities can be added by installing the TalkSwitch Software. |
|
|
|
Suggested Configuration
This shows the default connections to the TalkSwitch
Call Handling
Model Differences
TalkSwitch 24-CA
2 Lines In (L1/L2 and L2 only)
4 Local Extensions
Additional call handling capabilitities can be added by installing the TalkSwitch Software.
SUGGEST CONFIGURATION
TalkSwitch Back Panel
TalkSwitch
4 Lines In (as shown)
8 Local Extensions (as shown) LAN Connection
Voicemail Memory Slot
Connections from the TalkSwitch to all your telephone devices and computer, you need not add all of the phones. The fax machine should be put into local extension ‘E8’ for a TalkSwitch 48, or ‘E3’ for the TalkSwitch
‘E5’ jack to | ‘E6’ jack to | ‘E7’ jack to | ‘E8’ jack to | Remote Extensions 211, 212 ... 218 |
Extension 115 | Extension 116 | Extension 117 | Extension 118 |
|
LAN
(fax)
Incoming Phone Lines |
| *Memory card |
L1 to L4 |
| slot on the side |
|
|
|
|
|
|
AC connection to power outlet
P.A. 3.5mm jack
‘E1’ jack to
Extension 111
TalkSwitch 48-CA/ 48-CVA shown here.
|
| (receptionist) |
‘E2’ jack to | ‘E3’ jack to | ‘E4’ jack to |
Extension 112 | Extension 113 | Extension 114 |
Serial connection to PC computer via an RS232 serial cable
USB connection to
PC computer via a
USB cable
W W W.T A L K S W I T C H . C O M | 1 |