Siemens 2010 Tango operating instructions NiMH 1100 mAh

Page 17

18.7.99

kap03.fm5

Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619

Notes on operation

When installing and using the rechargeable batteries, please follow the rules below:

●Initially charge the batteries thoroughly. We recom- mend charging the batteries for approximately 16 hours without interruption (overnight for example). During the first week of operation, continually replace the handsets in the charging unit for recharging.

●New batteries do not usually reach their full capacity (i.e. maximum time when the telephone is in use and stand-by time) until they have been in normal use for several days. Although the battery LED indicates that the rechargeable batteries of a handset have been charged (LED off), you must assume during this initial phase that the capacity may not reach that of maxi- mum time when the telephone is in use, or that of stand-by time.

●Stand-by time

–Up to 70 hours (NiCd, 650 mAh)

–Up to 110 hours (NiMH, 1100 mAh)

–Up to 130 hours (NiMH, 1300 mAh)

●When the telephone is in use

–Up to 7 hours (NiCd, 650 mAh)

–Up to 11 hours (NiMH, 1100 mAh)

–Up to 13 hours (NiMH, 1300 mAh)

●After they have initially been thoroughly charged, the rechargeable batteries are fully operative. For normal operation, we recommend that the handsets are not placed in the charging unit each time a call is complet- ed. The rechargeable batteries should be discharged from time to time.

Caution: partially discharged batteries only offer lim- ited operating time.

●Make sure that the contacts do not touch metal or oily objects.

●Battery charging times

–Charging time in the handset

NiCd

approx. 4–5 hours

NiMH 1100 mAh

approx. 8–9 hours

–Charging time in the charging unit backup battery compartment

NiCd

approx. 24 hours

NiMH 1100 mAh

approx. 40 hours

●The LED display lights up occasionally to indicate that float charging is taking place.

7

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Gigaset 2010 Tango Signposts Gigaset 2010 TangoOverview Gigaset 2010 Tango Keys on the Gigaset 2000S Tango mobile unit Overview KeysKeys on the base station Display symbols bottom line Overview Key functions and display symbolsDisplay Symbols top line Overview Meaning of symbols Only use rechargeable bat Safety precautionsAs shown Type according to instrucCertification and CE marking Contents Contents Check the contents of the package Observe the safety precautionsStepwise start-up Stepwise start-upPhone cord Stepwise start-up Connecting the base stationPower cord For more information on the use of the batteries Stepwise start-up Inserting the batteries into the handsetCharging the batteries Setting the phone to dial pulsing DP Stepwise start-up Check signalling methodChecking your own telephone’s signalling method Temperature/ambient conditions Installing the base stationInstallation site/installation area For users who wear hearing aids NiMH 1100 mAh Mounting the carrying clip onto the handset Maintenance notesConnecting the telephone socket NiMH, 1300 mAh Technical dataProx W, during charging approx W Third party use/disposal Symptom Cause Remedy Procedure in the case of malfunctionsRemove it and plug it back Nection after dialling from a MemoryBatt. low beep Radio range is Tut Being exited Overview Signal tonesRecall Tuuuuut Internal dial tone Switching the handset to protected mode You can switch your handset to Protected mode Off On againOperating modes Operating modesSwitching off the handset When the handset is switched offSetting the signalling method Operating modes Signalling methodChecking the signalling method of your telephone line Activating/deactivating the automatic attenuation function Operating modes Operating in a telephone system400B 401B 936B 933B 934B Exchange codes Entering the exchange code 024B 025B 020B 021BModify the pause length according to the exchange code Deleting the exchange codeB89 Operating modes Changing the system code, changing the PINChanging the system code Changing the handset PIN18.7.99 Kap04.fm5 18.7.99 Kap04.fm5 Incoming calls Incoming callsAccepting calls If the handset is in the charging unitIncoming calls External call-waiting during internal calls Switching off the microphone mute functionEnding an internal call BR orExternal outgoing calls External outgoing callsCalling external subscribers FN b FRedial No answer or line busyManually inserting a pause Repeating the last number dialledEnter displayed digit e.g to transmit the call number External outgoing calls Dialling speed dial numbersDialling with speed dial numbers and number check To 9 for the required numberEnding a call Dialling a DSS number from a locked handsetIf the handset has been locked for external calls If the base station is lockedCollective ringing and internal calls Collective ringing and internal callsEnd call You wish to call 1 to 6. You will hear the internal ringDisconnect internal party again FN b G Allowing internal parties to listen in on a callChecking your own internal number Consultation calls Internal consultation calls and transferring callsInternal consultation calls and transferring calls Either FN b Base station settingsBase station settings Switching music-on-hold on/off Base station settings Setting the base station ringer toneHandset settings Handset settingsSetting the ringer volume Setting the ringer toneActivating/deactivating automatic call acceptance B38 Handset settings Setting the handset volumeTings Error beep signals an incorrect entry Procedure Description DefaultKey confirmation confirms each key stroke LowHandset settings Speed dial numbers Clearing all speed dial numbers O96 1B Switch on the lock. or 0B Switch off the lock Emergency calls when the Gigaset 2010 Tango is lockedGigaset 2010 Tango lock functions Gigaset 2010 Tango lock functionsDisplaying and storing emergency numbers #25Number stored Example emergency1st example no barred number stored FN bDisplaying or storing barred numbers Deleting all barred numbers Activating/deactivating the call number lockOutward restricted trunk access Set Unrestricted trunk accessActivating/deactivating the handset lock B81 B80 Lock functions on the handsetLock functions on the handset Display or store a DSS number Lock functions on the handset DSS number for handset lockB F H Handset display with active lockOperating more than one handset Operating more than one handsetRegistering a Gigaset 2000S Tango handset at a base station Prepare the base stationDe-registering a handset from a base station Switching between collective ringing and ring priorityRing priority for incoming calls Are availableSelecting a handset for ring priority Setting the number of rings for ring priorityOperation at more than one base station Procedure for operating at more than one base stationOperation at more than one base station PfN Selecting the best stationTo base station number Example base stations with no are selectedAnd2 are displayed Quick reference guide handset Gigaset 2000S Tango Quick reference guide handset Gigaset 2000S TangoIndex Switching on Switching off Switching off microphoneSwitching to protected mode Trunk access Replacing the handsetTelephone system Start-upSubscriber Private Communication Systems Group Issued byHofmannstrasse 51, D-81359 München Siemens Aktiengesellschaft

2010 Tango specifications

The Siemens 2010 Tango is a remarkable mobile phone that embodies the fusion of advanced technology and user-friendly design. Launched in 2010, the Tango stands out not only for its aesthetic appeal but also for its array of features tailored for both communication and entertainment.

One of the key features of the Siemens 2010 Tango is its sleek and slim profile. The device is designed for portability, making it easy to fit into pockets or small bags. The 2.4-inch display provides clear visuals, with vibrant colors that enhance the viewing experience, whether for casual browsing or messaging.

The Tango is equipped with a comprehensive set of communication features. It supports SMS, MMS, and email functionalities, ensuring users can stay connected regardless of their preferences. The phone's user interface is intuitive, featuring a well-structured menu that allows for seamless navigation through various applications.

In terms of multimedia capabilities, the Siemens 2010 Tango does not disappoint. The device houses a built-in camera that can capture decent quality images, catering to casual photography enthusiasts. It also supports video recording, enabling users to document moments in motion. The inclusion of a dedicated music player enhances the entertainment aspect, allowing users to enjoy their favorite tunes on the go.

The Siemens 2010 Tango emphasizes connectivity, supporting Bluetooth technology for wireless communications and file transfers. Additionally, users can access the internet, enhancing their ability to browse and share content online. The phone's compatibility with various network bands ensures that it operates efficiently in diverse locations.

Battery life is another noteworthy characteristic of the Siemens 2010 Tango. With a robust battery, the device promises extended usage, allowing users to communicate, listen to music, and browse without frequent recharges. This feature is particularly advantageous for those who lead busy lifestyles.

In conclusion, the Siemens 2010 Tango is a well-rounded mobile phone that combines style, functionality, and technology. Its thoughtful design and feature set cater to a wide array of user needs, making it a compelling choice for individuals looking for a reliable communication device. Whether for work or leisure, the Tango successfully delivers an engaging mobile experience that resonates with users in 2010 and beyond.
Top Page Image Contents