Siemens 300E operating instructions Environmental conditions, General notes on operation

General

Environmental conditions

lPlease read the safety notes on page 6.

lMake sure that the mobile unit is at least one meter away from medical equipment, fire alarm equipment and other radio equipment (e.g. radio telephones or radio pagers), otherwise its performance may be im- paired, e.g. by interference.

lThe mobile unit and charging shell should not be placed near other electronic devices, such as Hi-fi, office or microwave devices, as this may adversely affect operation of your telephone and/or the electronic equipment.

lDo not expose the mobile unit or charging shell to direct sunlight or other sources of heat.

lUse the mobile unit at temperatures between 0°C and +45°C.

lDo not expose the mobile unit to damp environments.

lAvoid using the mobile unit and charging shell in rooms where there is a lot of dust.

General notes on operation

lWhen operating the mobile unit a basic distinction is made between

–telephone/switching functions, e.g. when a call is in progress and

–local functions, display when mobile unit is on.

lAn incoming call cancels the local functions.

lLocal functions can be cancelled before saving with the function key ß or the line key.

lLocal functions can also be performed in the charging shell.

lDisplay texts from the system are shown without muted vowels and special characters.

lThe display of call charges at the mobile unit depends on the Hicom setting.

lYour telephone book entries, all settings and your PIN are not lost, even if you remove the batteries.

lThe mobile unit can be used as a second executive telephone with limited functions.

10