D-Link DPH-150S user manual System Restore Factory Default, System Auto Provision

Page 25

Time Zone

Select your time zone. If there is daylight saving in your area, tick the check

 

box

Daylight Saving

Check to enable daylight saving

6.4. System – Restore Factory Default

Restore Factory Setting Restores all the settings back to the factory default settings

6.5. System – Auto Provision

Protocol

FTP, HTTP and TFTP support for downloading firmware and automatic

 

configuration. The default setting is NO (function disabled)

FTP / HTTP / TFTP IP

IP address of the provisioning server

FTP / HTTP / TFTP Port

Listening port of the provisioning server

Username

The username required by the provisioning server for authorization.

Password

The password required by the provisioning server for authorization.

24

Image 25
Contents DPH-150S VoIP Phone Table of Contents Last Dialed Number Through Call History Page Introduction Getting Started Package Contents Network Interface Phone SpecificationsKey Function Phone DiagramKey Pad Definition and Text Entry Text ModeNormal ABC Numeric PqrsPQRSWide Area Network / Internet Connecting the IP PhoneInitial Setup IP Phone Setup Map ENABLE/DISABLE Setup Adsl ID Enable Adsl DialupSetup Adsl Password Display NameDhcp Dynamic Host Configuration Protocol Disable Adsl DialupEnable Dhcp DNS Server IP Disable DhcpSntp Server IP CF Call Forward Unconditional Do not DisturbCF Call Forward Busy CF Call Forward No AnswerAnony Call Rej. Anonymous Call Rejection Anonymous CallRinging Type MAC AddressSpeaker Volume Volume Adjustment Ringer VolumeVersion Language SelectionOperating the Phone Dialing an IP Address Handset VolumeDialing a SIP Number Speed DialingAnswer a Phone Call Switch to another LineMute TransferOn Hold Through Call HistoryCall Forward Three Way ConferenceStoring a Number Using the Phone Book Dialing from the Phone BookEditing a Number Deleting a Number Accessing the Configuration Menu Using the Web ConfigurationWeb Login System Management System Auto Provision System Restore Factory DefaultSystem Restart System Network Network Settings / DhcpNetwork Network Settings / Static IP Network Network Settings / PPPoEEnable or disable Vlan Network QoS SettingsIdentification of Vlan Network NAT Traversal Settings UPnP Always send keep-alive packet Keep-Alive Time Network NATPage VoIP SIP Settings Others VoIP SIP Settings Message ServerSession Timer Media PortVoIP SIP Account Settings Advance Voice Settings Advance Phone Settings Phone Setting Anonymous Call Reject Anonymous CallCall Forward Hot LineAdvance Phone Settings Timer Advance Speed Dial Advance Phone BookNumber Speed dials phone number x is the speed dial number Advance MP3 Ring Advance Music StationStation Name Ring FileCall Log Call Tracing Log Troubleshooting Page Appendix a Wall Mount Installation Figure A3 Numeral keys Appendix B Internet RadioFCC Caution FCC Statement