Multi-HANDSET System Operation
Prepare for use
If you have more than one HANDSET, you have a
An added HANDSET comes with CHARGER, CHARGER AC ADAPTOR, BETTERY PACK and BELT CLIP.
NOTE: USE ONLY WITH CLASS 2 POWER SOURCE 9V DC, 300mA for the BASE UNIT
9V DC, 100mA for the CHARGER UNIT
1.Install the BETTERY,CHARGER AC ADAPTOR and BELT CLIP, please see page 9 for detail.
2.IMPORTANT: Before initial use, charges the HANDSET for 12 hours. Place the HANDSET on the BASE UNIT or CHARGER UNIT with TELEPHONE KEYPAD face up, and make sure that the CHARGER UNIT LED indicator lights up.
3.Rigister: place one HANDSET on the BASE UNIT(not the CHARGER UNIT) for 2 to 5 seconds, a long beep will be heard, and LCD display the ID of this HANDSET.
4.place another HANDSET on the BASE UNIT(not the CHARGER UNIT) for 2 to 5 seconds, a long beep will be heard, and LCD display the ID of this HANDSET. Continue this step until all HADNSET finish register.
5.You can charger the battery of HANDSET by place the HANDSET to BASE UNIT or CHARGER UNIT.
RING : HI
HS - 1
10:11 AM10/18 NEW0 Total0
RING : HI
HS - 2
10:11 AM10/18 NEW0 Total0
Transfer Call
1.During a call , press the UP/Transfer button. The LCD Screen of the initiating HANDSET will display “TRANSFER HS-
2.Enter the ID # of the receiving HANDSET by pressing the TELEPHONE KEYPAD “1” to “5” buttons.
3.The initiating HANDSET will return to STANDBY mode.
4.The receiving HANDSET will receive a special alerting tone and the LCD Screen will display “TRANSFER”
5.The receiving HANDSET will answer the call by pressing the TALK button.
TRANSFER
HS - -
1min 15sec
TRANSFER
HS - 2
10:11 AM10/18 NEW1 Total1
6.If the receiving HANDSET does not answer the call within 30 seconds, the initiating HANDSET will receive a Ring Back melody. The initiating HANDSET can answer the call by pressing the TALK button within 30 seconds, or after 30 seconds the BASE UNIT will off the line automatically.