Emerson HK250 user service Storing Names and Telephone Numbers

HK250.O/M.QXD 9/26/02 3:49 PM Page 21

BASIC OPERATION (CONTINUED)

STORING NAMES AND TELEPHONE NUMBERS

The memory can store up to 20 name/telephone numbers.

1

2

1

2

Press the PROG button while in the Standby mode.

Using the Key buttons (0-9, *, #) ❶, enter the telephone number, then press the PROG button ❷ again.

NOTES:

•If a 17th digit is entered, the Store mode will be terminated with an error tone.

•If you misdial, press the ERASE button to clear the last digit.

•If desired, pause can be inserted between digits by using the PAUSE button. When a pause is entered, “P” will be displayed.

3		See the Character Map Chart on the top of the next
		page and using the Key buttons (0-9,*,#) ❶, enter the
		name. Press the ➛ ❷ or ❿ ❸ button to move the cursor
1		to the right or the left after entering each character. For
	4	example, press the 4 button ❶ once to enter a “G”, then
2		press the ❿ button ❸. Press the 7 button ❹ three times
	3	to enter the second character, “R”. Repeat this step until
		all letters have been entered (up to 16).
4	2	5
	1

Press the MEMO button ❶. Enter two digits (01-20) using the Key buttons ❷ to assign the desired memory location to store the data. “0” must be added for memory locations 1 - 9.

One second after step 4, “Save ok” will appear in the display for three seconds and a confirmation tone will be heard.

NOTES:

•If the data is stored in a location where data has already been stored, the old data will be overwritten.

21