ROAMING
Scans the channels to stay connected to any available system of BELL MOBILITY.
SET MODE
Selects the Preferred System.
1.Press 
.
2.Select one of the following options(Home only/
Analog only/Automatic) with the navigation key,
then press 
.
●Automatic : Scans the radio channels based on the Automatic setting.
●Home only : Only within your home area or home affiliated area.
●Analog Only : Stays in the analog setting until the hand set is powered on after being powered off.
FORCE ANALOG
Temporarily forces phone to use Analog mode – mode automatically ends in 10 minutes.
1.Press 
.
2.Select “Yes” or “No” with the navigation key, then
press 
to activate it.
ROAMING
NAM SETTING
Enables Auto NAM (Number Assignment Modules) or manually changes a NAM.
AUTO NAM
To automatically switch phone to the proper NAM when you have multiple NAM registrations:
1.Press 
.
2.Select “Yes” or “No”, then press 
to save it.
CHANGE NAM
To change the NAM used by the phone when you have multiple registrations:
1.Press 
.
2.Select a NAM (NAM1,NAM2) with the navigation
key, then press 
to save it.
Page 50 - Chapter 4 | Chapter 4 - Page 51 |