Wall mounting

Your Freestyle 70 can be wall-mounted by using the bracket provided. You can use the bracket as a template to mark where the screws should go into the wall.

Before you wall-mount your Freestyle 70, check that:

•the wall can support the weight of the base unit and handset.

•the position you choose leaves sufficient space so that the base unit (which is larger than the bracket) is clear of any obstruction on the wall, such as a shelf or cupboard. Room should be left so that the handset can be placed on charge without touching any obstructions.

•leave enough room for the aerial to be extended when wall mounted.

RQS

1Drill 2 holes for the screws and insert the wall-plugs provided (if required).

2Drive the screws into the wall, leaving about 4mm free on which to mount the bracket and base unit.

3Make sure that the power supply and the telephone cables are connected to the base unit, then fit the cables into the channels on the bottom of the base unit.

4Clip the bracket onto the base unit as shown below.

B SQUEEZE

INWARD

5	Attach the bracket and base unit
	by hooking them over the screws
	protruding from the wall.