Synergy 4000 – Edition 3 – 15.05.06 – 7372
4Getting started
After charging your handset for the | At the base: |
|
first time, subsequent charging |
| |
time is about |
|
|
Batteries and handset may become | 1. Press and hold | for 10 seconds, until you hear a beep, |
warm during charging. This is | then release it. |
|
normal. |
| |
|
|
At the handset:
IMPORTANT
DECT GAP Profile only guarantees that basic calling functions will work correctly between different makes/types of handset and base. There is a possibility that certain services, such as Caller Display, will not work correctly.
2.Press Menu or Menu until Registration is displayed, then select the OK option.
3.Register Base is displayed select the OK option to confirm.
4.Use the keypad to enter the number of the base you want to register to (1 – 4), then select the OK option.
The display shows, e.g. Search for Base 2 (for base 2) and the 
icon flashes.
5.Enter your 4 digit PIN, then select the OK option. When the base is located, your handset display will be updated with the handset number for the selected base.
Using your phone
If you need further instructions on using your phone or require an explanation on any of the features, then please refer to your main BT Synergy 4100 or 4500 user guide.
If you require any further assistance, then please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com