BT Diverse 6150 – Edition 3 – 02.03.05 – 6604
| Additional handset settings | 61 | |
|
|
|
|
|
|
|
|
Day, date and time
If you subscribe to your network’s Caller Display service, the date and time are set automatically on all handsets when your BT Diverse 6150 receives its first call. If new handsets are then registered to the base, they will also receive the current date and time. However, to enable the answer machine to ‘date stamp’ your messages, you also have to set the day. The day has to be set manually using a handset. The date and time can also be set manually using a handset. If the mains power to the base is cut, the day, date and time are lost and will need to be reset.
Setting day, date and time using a handset
1.Press MENU. Scroll DOWN to TIME & DATE SETTINGS and press OK. Display shows SET DATE & TIME. Press OK.
2.Use the keypad to enter the date, e.g. 
= 3rd June. Press SAVE.
3.Enter the time e.g. 
= 3.30pm. Press SAVE.
4.Press DOWN, display shows SET DAY. Press OK.
5.Scroll DOWN until the current day is highlighted then press SAVE.
The new time will not appear on the other handsets until they go on line or a call is received.
If you do not set the date, time and day the base display will continually flash CL.
Time and date do not show on the display when there are missed calls/messages.