Clarity Cordless Telephone manual Troubleshooting

Page 30

TROUBLESHOOTING

The unit will not operate/no dial tone:

Verify the TALK Button is lit.

Verify the AC Adapter is securely plugged into AC outlet, the base and the telephone.

Verify the telephone line cord is securely plugged into the wall jack and the telephone.

Make sure the base antenna is in an upright position.

Make sure the handset battery is fully charged.

Verify the telephone is in the correct dialing mode, tone (touch) or pulse (rotary).

Make sure you are in the usable range of the base station.

Reset the security code by placing the handset in the base for 5-10 seconds.

The phone does not ring when you receive a call:

Make sure the RINGER switch on the handset and base are set to ON.

Verify the AC Adapter is securely plugged into

AC outlet, the base and the telephone.

Verify the telephone line cord is securely

30

Image 30
Contents C4205 User Guide Table of Contents Important Safety Instructions Important Safety Instructions Important Safety Instructions Safety Instructions for Batteries Important Safety Instructions Features Features Connecting telephone line cord Choosing a LocationConnecting AC Adapter Connecting Your TelephoneTABLE/DESK TOP Installation Wall Mounting Installation Handset Battery Installation Battery InstallingConnecting Hours before usingTalk Time about Four 4 hours Eight 8 daysTelephone Handset Boost On Talk buttonIs Orange Is Green Page Page Telephone Base Page Page Page Using Your Telephone Placing a CallPage Temporary Tone Memory Storage Page Maintenance and Care Troubleshooting Page Make sure the handset battery is fully charged