Binatone 2510 manual Where to find it, Making and answering calls, Phone Book memory dialling

TWICE ￿ modify

￿ number?

The display shows: ￿ phonebk ￿ add

￿ name?

Color profile: Generic CMYK printer profile Composite Default screen

1Where to find it

Display messages and symbols

EXT

This shows the handset’s name.

INT

2 Making and answering calls

The Speakerphone

3 Phone Book (memory dialling)

You can store up to 40 numbers in each handset’s Phone Book (memory). Each

UP and DOWN buttons

Press to display the last 10 numbers you dialled.

Press during programming to move through the menus.

Press during a call to change the volume in the earpiece.

C (CLEAR)/MUTE button

Press during programming to go back to the previous option, or to clear digits from the display. Press during a call to mute the microphone.

PHONE button

Press to begin, answer and end a telephone call.

/RECALL button

Press to begin answering machine functions.

You may need the Recall function if your phone is connected to a PBX, or if you use Select Services.

MENU button

Press to start and end the programming menu.

Mouthpiece

OK button

Press briefly while programming to confirm your selections. Press and hold to switch the handset off.

Press during a call to adjust the volume in the earpiece or speakerphone.

SPEAKERPHONE button

Press to turn the speakerphone on and off.

CALLER (Caller Display) PAUSE button

Press to display details of people who have called you. Press to generate pauses when using the phone on a PBX.

INTERCOM button

Press to make an intercom call (if you have more than one cordless handset).

PHONE BOOK (Memory) button

Press to make calls to numbers stored in memory

CHARGE light

When you dial a phone number, it is

shown here. After 15 seconds, the micro call’s duration is shown.

What the symbols mean

		Left arrow	The number you’ve dialled has more than 12 digits, and
			the display is scrolling to show the most recent ones.
		Battery	Whenever this shows ‘nearly empty’ (	), put the handset on
		charge level	the base unit to charge the batteries. While the battery is being
			charged, the level shown will keep changing.
	EXT		You are connected to the telephone line — your handset is ‘off-
			hook’. The EXT flashes, without the phone symbol, while your
		Outside call
			handset is ringing for an incoming call.
		Intercom call	You are connected on an intercom call. The INT flashes,
			without the phone symbol, when the HANDSET LOCATOR
INT			button on the base unit is pressed.
		Programming	You are programming the handset or base unit.
		Phone book	You have pressed the MEMORY button to make a call to a
			stored number.
		Lock	Your handset’s keypad is locked.
		Mute	Your handset’s microphone is muted.

Press the SPEAKERPHONE ( ) button to listen on calls without holding the handset to your ear. You can start a call by pressing the SPEAKERPHONE button, or press it at any time during a call; but you must always press the

PHONE ( ) button to end a call.

To make a call

1Key in the phone number

If you make a mistake, press to clear digits from the display.

To clear all digits, press and hold .

2Press PHONE or SPEAKERPHONE

To answer a call

When the handset and base unit ring:

◗Press PHONE or SPEAKERPHONE

To end a call

◗Press PHONE so that the symbol disappears from the display

Last Number Redial

To make a repeat call to the last number you dialled:

1Press PHONE or SPEAKERPHONE You hear Dial tone in the earpiece.

2Press

number can have up to 20 digits, and you can store a name of up to eight characters with the number.

To store a number 1 Press MENU 2 Press OK 3 Press OK

4Key in the name, using the numbered keys

5 Press OK

6Key in the number

Note: if you’re using Caller Display, you should store the full number, including the dialling code (starting with 0). If it’s a local number, you’ll still be charged the Local Call rate when you dial it from memory.

7	Press OK	￿ add
	You can now carry on storing numbers, or press MENU		again to go
	back to standby mode.
To clear a number from memory
1	Press MENU	￿ phonebk
2	Press OK	￿ add
3	Press ▼	￿ delete
4	Press OK

This comes on when the handset’s batteries are being charged.

Before you can use the handset to make calls, you need to fit and fully charge the batteries.

For instructions on how to install the base unit and charger pod, and to fit and charge the batteries, refer to the user guide for the base unit telephone.

2

Speakerphone	Your handset’s loudspeaker is on.
Answering	The answering machine is switched on.
machine
Messages	You have received new Caller Display messages.
Signal level	Shows the strength of the signal between the handset and base
	unit, and flashes when you are out of range of the base unit. If
	the level is low, or the symbol is flashing, move closer to the
	base unit.

To make a repeat call to one of the 10 last numbers you dialled:

1Press ▲ or ▼ until the number is shown on the display

2Press PHONE or SPEAKERPHONE

Muting the mouthpiece

◗Press once to mute the mouthpiece

While the mouthpiece is muted the person on the other end of the call can’t

hear you. is shown on the display, and you cannot press any numbered key to send digits down the line.

◗Press once again to un-mute the mouthpiece

4

6 Press OK
You can now carry on deleting numbers, or press MENU	again to go
back to standby mode.

To make a memory call

1Press MEMORY ￿ (and the first stored name and number)

2Press ▲ or ▼ until the display shows the name and number you want

3Press PHONE or SPEAKERPHONE to dial the number

5

Phone Book, continued

To modify (change) a number in memory

1Press MENU then OK ￿ phonebk ￿ add

3 Press ▼

4 Press OK

5 Press ▲ or ▼ until the display shows the name and number then press OK

6 Modify the name if necessary, pressing to clear characters from the display before keying in the correct ones

7 Press OK

8 Modify the number if necessary then press OK

You can now carry on modifying numbers, or press MENU again to go back to standby mode.

5 Caller Display

If you subscribe to this feature from your service provider, you can see the phone numbers of people calling you, before you answer. The Fusion 2510 will store the numbers of the last 30 incoming calls. Each Caller Display record includes:

■The caller’s name, if it’s one you’ve already stored in your phone’s memory.

■The caller’s number (up to 20 digits). The number won’t be displayed if the network they’re calling from doesn’t support this feature; or if they’ve withheld their number by dialling 141. If the caller’s number wasn’t available, the display shows a row of dashes.

■The month, date and time of the call

When there have been calls you haven’t answered, the symbol is shown on the display, and the IN USE light on the base unit flashes.

To check Caller Display records

1Press CALLER

2Press ▲ or ▼ to scroll through the records

You’ll see either a name or a number and the time of the call. If a name is displayed, to check the number:

3Press OK

When you reach the beginning or end of the list of records, you’ll hear a
warning ‘beep’. Once you’ve checked all the records, the		symbol will
disappear from the display and the IN USE light will stop	flashing.		6

Key tone on/off

Each time you press a key, you hear a tone. You can turn this off if you prefer.

1	Press MENU	then ▼	￿ phonebk ￿ handset
2	Press OK	￿ beep
3	Press OK	￿ keytone
4	Press OK	￿ on or	off
5	Press ▲	to switch on or ▼		to switch off
6	Press OK	to confirm
7	Press MENU	to go back to standby mode

Low Battery tone on/off

When the battery level is low, as well as seeing the symbol on the display, you also hear a tone. You can turn the tone off if you prefer.

1	Press MENU	then ▼	￿ phonebk ￿ handset
2	Press OK	￿ beep
3	Press OK	￿ keytone
4	Press ▼	￿ low batt
5	Press OK	￿ on or	off
6	Press ▲	to switch on or ▼		to switch off
7	Press OK	to confirm
8	Press MENU	to go back to standby mode

‘Out of range’ warning tone on/off

When the handset goes out of range of the base unit, you hear a tone. You can turn the tone off if you prefer.

1	Press MENU	then ▼	￿ phonebk		￿ handset
2	Press OK	￿ beep
3	Press OK	￿ keytone
4	Press ▼	TWICE ￿ outrange
5	Press OK	￿ on or	off
6	Press ▲	to switch on or ▼		to switch off
7	Press OK	to confirm
8	Press MENU	to go back to standby mode			10

Caller Display, continued

To return a call
To make a return call to someone who’s called you:
◗ Press PHONE	or SPEAKERPHONE	while the name and

number are shown on the display

To delete a Caller Display record

1Press CALLER , then ▲ or ▼ , until the record is displayed

2Press OK again ￿ delete?

3Press OK to delete this record

OR press C if you don’t want to delete the record When there are no more records, the display shows empty .

To delete all Caller Display records

1Press CALLER

The display shows the first Caller Display record

2Briefly press C ￿ del all?

3 Press OK	to delete all records
OR press C	if you don’t want to delete all records

When there are no more records, the display shows empty .

How to key in letters and other characters

When you’re keying in names (such as when storing numbers in memory), the numbered keys 1 to 9 give you letters, as follows:

1 gives space, - 1 2 gives A B C 2 3 gives D e f 3 … etc.

For example, to key in jane — press 5 once, press 2 once, press 6 twice and press 3 twice.

After keying in a character, wait for the cursor (the flashing line) to move to the next position before you key in the next one.

C takes you back to the previous character; ▼ takes you to the next one.

If you need to insert a pause when keying in a number, press the CDS button. (You’ll only need this if you’re using your phone on a PBX.)

7

7 Call barring

Using call barring, you can prevent certain types of call being made on your handset. There are four levels of Call Barring:

■no bar — all calls are allowed. This is the default.

■National — you can make local and long-distance calls, but no international calls (numbers starting with 00).

■local — you can make local calls, but no long-distance calls (numbers starting with 0).

■internal — you can’t make any outgoing calls except emergency 999 calls.

Note: call barring is not possible on the main base.

To set Call Barring
1	Press MENU	then ▼	TWICE ￿ phonebk ￿ base
2	Press OK
3	Press ▼	TWICE ￿ call bar
4	Press OK	￿ pin

5Key in your PIN (default 0000) and press OK ￿ handset 1

6If you want to set call barring for a different handset, press ▲ or ▼ until its number is shown on the display

7 Press OK

￿The display shows the current level of call barring for the handset you have selected.

8Press ▲ or ▼ to change the call barring level

9	Press OK	to confirm
10	Press MENU	to go back into standby mode

To turn call barring OFF:

◗ Follow steps 1 to 10 above, setting the level to no bar at step 8

11

6 Tones and volumes

To adjust the earpiece or speakerphone volume during a call

1 Press OK to show the current volume level ￿ 1 to 5

2Press ▲ or ▼ to change the volume

3Press OK to confirm

If you want to turn off the speakerphone and listen through the earpiece, just press SPEAKERPHONE

To adjust the earpiece volume for all calls

While the phone is not connected on a call:

1	Press MENU	￿ phonebk
2	Press ▼	￿ handset
3	Press OK	￿ beep
4	Press ▼	￿ ear vol
5	Press OK	￿ ear vol and 1 to 5

6Press ▲ or ▼ to change the volume

7	Press OK	to confirm ￿ You hear a ‘beep’
8	Press MENU	to go back to standby mode

Handset ringing melodies

To change the ringing melody for incoming external calls:

1	Press MENU	￿ phonebk
2	Press ▼	￿ handset
3	Press OK	￿ beep
4	Press ▼	FOUR times ￿ ext ring
5	Press OK	￿ melody and 1 to 5

6Press ▲ or ▼ to hear each melody in turn*

7	Press OK	to confirm the melody you want
8	Press MENU	to go back to standby mode

To change the ringing melody for intercom calls:

◗Follow steps 1 to 8 above, but at step 5, press ▼ THREE times so the display shows int ring

8

8 Customising your phone

Your handset’s name

The default name shown on your handset’s display is micro . You can change this to anything with up to eight characters.

1	Press MENU	then ▼	￿ phonebk ￿ handset
2	Press OK	￿ beep
3	Press ▼	FIVE times ￿ h s name
4	Press OK	to display the current name
5	Press C	repeatedly to clear the display

6Key in your chosen name

7	Press OK	to confirm
8	Press MENU	to go back to standby mode

Auto-answer

Normally, you need to press PHONE or SPEAKERPHONE to answer an incoming call. But with auto-answer turned on, when your handset is resting on the base unit and it rings for an incoming call, you can answer by simply lifting the handset.

To turn auto-answer on or off:

1	Press MENU	then ▼	￿ phonebk ￿ handset
2	Press OK	￿ beep
3	Press ▼	SIX times ￿ auto ans
4	Press OK	to display the current setting
5	Press ▲	to switch on or ▼		to switch off
6	Press OK	to confirm
7	Press MENU	to go back to standby mode

!answered a call by lifting the handset; if you do, you’ll disconnect the call.If you have turned auto-answer on, don’t press the PHONE after you’ve

12

Handset ringing volume

You have a choice of five volume levels or of turning the ringer off.

1	Press MENU	￿ phonebk
2	Press ▼	￿ handset
3	Press OK	￿ beep
4	Press ▼	TWICE ￿ ring vol
5	Press OK	￿ 1 to 5 or vol off

6Press ▲ or ▼ to change the volume

7	Press OK	to confirm
8	Press MENU	to go back to standby mode
Base unit ringing melody
1	Press MENU	￿ phonebk
2	Press ▼	TWICE ￿ base
3	Press OK	￿ volume
4	Press ▼	￿ melody
5	Press OK	￿ melody and 1 to 5

6Press ▲ or ▼ to hear each melody in turn*

7	Press OK	to confirm the melody you want
8	Press MENU	to go back to standby mode
Base unit ringing volume
1	Press MENU	￿ phonebk
2	Press ▼	TWICE ￿ base
3	Press OK	￿ volume
4	Press OK	￿ ring vol and 1 to 5 or vol off

5Press ▲ or ▼ to change the volume

6	Press OK	to confirm the volume level you want
7	Press MENU	to go back to standby mode

* If you’ve set the ringer volume to OFF, you won’t hear any melody at this point.

9

Display language

By default, display messages are shown in English; you can change the language to French, German, Portuguese, Spanish or Russian (or other languages which may be listed on the display) if you prefer.

1	Press MENU	then ▼	￿ phonebk ￿ handset
2	Press OK	￿ beep
3	Press ▼	SEVEN times ￿ language
4	Press OK	to display the current language
5	Press ▼	until the language you want is displayed
6	Press OK	to confirm
7	Press MENU	to go back to standby mode

Locking the keypad

When the keypad is locked, no numbered keys can be pressed so you can’t make calls by mistake.

To lock the keypad:
1	Press MENU	￿ phonebk
2	Press ▼	THREE times ￿ key lock
3	Press OK
4	Press ▲	so the display shows on
5	Press OK	to confirm

￿The display shows the symbol when the keypad is locked. To unlock the keypad:

1	Press MENU	￿ key lock
2	Press OK
3	Press ▼	so the display shows off
4	Press OK	to confirm

Locking and unlocking the keypad (quick method)

This method is quicker but less secure than the one above.

◗Press and hold # (HASH) while the handset is idle

!With the keypad locked, you cannot make emergency calls to 999 or 112. continued overleaf …… 13

E:\Binatone2005\Fusion2510\Cordless_folding\Fusion2510_cordless_draft01a.vp 14 December 2005 12:27:11