Troubleshooting Guide

Problem	Possible Cause	Correction
No transmission while	Weak batteries.	Charge or replace batteries.
pressing the PTT button.

Unit is on, but will not be	Incorrect battery	Install the batteries following the
operated.	polarity.	polarity diagram inside the
		battery compartment.
Weak or no signal	Weak batteries.	Charge or replace batteries.
received.
received.	Channel or Tone Code	Adjust the unit's setting to
	Channel or Tone Code	Adjust the unit's setting to
	not set the same as target	match those settings of the
	transceiver.	target transceiver.
	Volume level too low.	Increase volume level.
	PTT key inadvertently	Release PTT button.
	depressed.

	Excessive radio	Change to a different channel.
	interference.
Unit beeps, but will	Batteries extremely	Charge or replace batteries.
not function when	discharged.
turned on.
Reception of	CTCSS not on.	Turn on CTCSS sub-tone code.
unwanted signals

Note : See end of the manual for our web page and toll-free number is you need additional assistance.

Problem