Motorola MD670 Series manual Inserting Pauses in a Phone Number

Using the Basic Functions

To save a number in either phonebook:

Action

1From the standby screen, enter the phone number, then press PHNBK (a).

Note: Be sure to include long distance codes and pauses if required.

2At the ENTER NAME prompt, use the keypad to enter the name (see page 39).

3Press SAVE (a) to store the name and number.

Note: If the phonebook is full, PHONEBOOK IS FULL displays.

Tip: Erase numbers you no longer call to make room for new ones.

4Press and hold CLEAR for 2 second on the base station or OFF for 2 seconds on the handset to return to the standby screen.

Inserting Pauses in a Phone Number

Action

When you want to insert a pause, press PAUSE (a). A P displays.

When you call a number with a pause, the phone waits a few seconds before transmitting the next digits in the dialing sequence. This is useful when you have to dial a number for access to an outside line, or for going into a voicemail system.

32