Setting Up
Registering Your Cell Dock
Before you can use your cell dock, you must register the device to your SD4500 series base unit.
You can register up to 8 devices (handsets, cameras, cell docks, etc.) to a base unit.
To register your cell dock:
1Press and hold the Page/Registration button located on the bottom of the cell dock. Release the button when the cell dock’s In Use/Charging LED light flashes red.
2Press and hold the Page button on base unit. The charge/page and In Use/Voice Mail lights on the base unit flashes. The LED lights on the cell dock and base unit’s stop flashing once the registration is complete.
To Check
Registration:
•Press the CONNECT TO button on the handset.
•Scroll through the items listed to confirm that the device you registered is available.
Setting Up
3