Mounting the Base on a Wall Plate
You need a standard wall plate (not supplied) for this mounting method.
1.Plug one end of the short modular cord into the phone jack on the back of the base.
2.Route the short cord downward through the top left slot on the base's bottom and under the clips as shown.
4.Align the tabs on the bracket with the slots on the back of the base and push up on the bracket until it snaps in place.
Note: If you later want to remove the bracket, press PUSH and slide the bracket down to remove it from the base's bottom.
5.Insert the supplied AC adapter's barrel plug into the 12V DC jack on the back of the base. Then route the adapter's cord around the strain relief and through the right slot on the base's bottom and under the clips as shown.
(illus
w/callout: AC Adapter)
3.Route the other end of the short cord through the hole in the sup- plied bracket's center.
6.Plug the adapter into a standard AC outlet.
7.Plug the modular cord into the wall plate's jack.
7