Topcom Butler 3501 Twin/Triple/Quattro
DECT GAP Profile only guarentees that basic
6.2 REMOVING A HANDSET
You can remove a handset with a base to allow another handset to be registered
1.Enter the menu by pressing 
/OK
2.Select SETUP using the up 
and down 
keys
3.Press OK
4.Select DEL HANDSET using the up 
and down 
keys
5.Press OK
6.Enter the 4 digit base PIN code
7.Press OK
8.Select the handset to be removed
9.Press OK to validate
6.3 SETTING UP A HANDSET ON ANOTHER BASE
If you want to use a Butler 350x handset with a base of another model. The base must be GAP compatible.
1.To put the base in registration mode, refer to the base user manual.
2.Carry out operations 3 to 10 from the paragraph 6.1.
6.4 SELECTING A BASE
The handsets can be registered up to 4 bases simultaneously.
To select a base:
1.Enter the menu by pressing 
/OK
2.Select REGISTER using the up 
and down 
keys
3.Press OK
4.Select SELECT BASE using the up 
and down 
keys
5.Press OK
6.Select a base or select AUTO using the up 
and down 
keys
7.Press OK
When selecting the base, the currect selected base in indicated by a blinking base number. If you select ‘Auto’ the handset will automatically search for another base when you are out of range!
ENGLISH
Topcom Butler 3501 Twin/Triple/Quattro | 23 |