SpectraLink NetLink 8000 manual Getting Started, Basic Handset Operation Summary

Getting Started

GETTING STARTED

Your NetLink 8000 Series Wireless Telephone is designed for full mobility within the workplace and operates much like a cell phone. It also interfaces with the telephone system at your workplace and incorporates advanced telephony features. This section covers the basic functions available in every facility. For specific telephony sys- tem functions, see the Facility-Specific Features section or contact your system administrator.

Place the handset into the charger for a minimum of two hours. The handset's Battery Pack must be fully charged before its first use. See the section Charger Models for full information.

Basic Handset Operation Summary

If you want to Then

Remove the Press down on the latch on the Battery Battery Pack Pack at the back of the handset and pull

the Battery Pack towards you. The Battery Pack releases outward.

Replace the Slide the lip of the Battery Pack into the Battery pack bottom of the cavity. Push the top of the Battery Pack until it snaps into place. You

should not have to force it into the handset.

Turn handset on Press and hold the END key until two chirps sound.

Turn handset off Press and hold the END key. One chirp will sound. If you are in a call, hang up first, then turn off the handset.

14