WALL MOUNT INSTALLATION
Because it is necessary to cradle the handset for 12 hours prior to connecting it for use the first time, it is better to leave the unit on a flat surface during initial charge before attempting to hang it on the wall.
1.Cradle the handset.
2.Connect the power supply adapter into the base and then an AC outlet.
3.Allow phone to charge for 12 hours before using the first time.
The CHARGE/IN USE light comes on indicating that the battery is charging.
4.After charging, plug the short phone line cord into the phone jack on the back of the unit and then to the wall jack.
5.Attach the wall mount by inserting the two tabs at the top and then snapping the tab at the bottom into place.
6.Slip the mounting holes over the wall plate posts and slide the unit down firmly into place. (Wall plate not included.)
1
2
1
2
3
4
5
6
7
8 | 3 |
9 |
|
0 |
|
CHARGE
IN USE | CHARGE/ |
PAGE / FIND | IN USE |
| light |
4
5
8