Snom 320 manual English

Page 7

[ S N O M 3 2 0 Q U I C K I N S T A L L A T I O N V 1 . 0 0 ]

1Turn the phone upside down (Fig. 3). Please, ensure that you do not damage the display and/or its hinge and that you do not drop the receiver. You may want to hold the phone in your lap or have a second person hold it.

English

1

Fig. 3

Fig. 4

2Lightly press the snap-fits of the footstand inwards (Fig. 3) and, at the same time, tilt the footstand backwards and lift it from its anchorage in the mounting holes (Fig. 4).

3Rotate the footstand 180° around its vertical axis.

4Make sure that the handset cord has been clipped correctly into the groove on the bottom shell of the phone, as shown in Figs. 4 and 6. Failure to clip the cord into the groove will result in damage to the cord when the footstand is attached in the position for wall mounting.

snom technology AG • 7

Image 7
Contents Snom Quick InstallationSnom technology Aktiengesellschaft Table of Contents English Power supply InstallationDelivery Content Safety InformationWall Mounting Setting up the PhoneEnglish English Adjusting the Handset Rest Cleaning Connecting Phone Connecting the phone Keypad Key Digits Lower case Upper case Additionally, the following keys are available English Dhcp Configuration BootingInitialization Selecting the languageSetting the Netmask Setting the IP AddressSetting the IP Gateway Selecting the Tone Scheme Setting the DNS ServerSelecting the Timezone Logging on the first account Complete manual is available on our web English Dhcp IndexEnglish