Sharp SGH-I600 manual Joint the Receiver connector

Exploded View/Disassembly&Assembly Instructions

	10
9		1) Joint the RECEIVER connector.

1)Put PBA inside the Front Case.

2)Attach POWER KEY, VOLUME KEY, and FUNCTION KEY.

1)	Notice that other material should not be inserted
to LCD and WINDOW.			1) Make the RECEIVER wire groove that gouge the
2)	KEY's groove does so that head toward down and
			PBA.
assembles.			2) Observe in polarity of the RECEIVER connector.
3)	Assemble POWER KEY, FUNCTION KEY carving a
seal after is rapidly.
	11			12
		1) Joint SPK-MOTOR connector.			1) Assemble the Rear Case with the
					Front Case.

1)Press SPK-MOTOR connector so that is sonant 'Exactly' vertically.

1)First, assemble top portion Locker, and both side.

2)Press with hand in case of the top portion does not fit certainly after assembly.

5-10

SAMSUNG Proprietary-Contents may change without notice

This Document can not be used without Samsung's authorization