Southwestern Bell FM2552/FM2000 owner manual Installation

Page 5

INSTALLATION

FOLLOW THESE PRECAUTIONS BEFORE

INSTALLATION:

1.Never install telephone wiring during a lightning storm.

2.Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

3.Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

4.Use caution when installing or modifying telephone lines.

To Install Batteries

a. Open the battery door with a ball-point pen.

NOTE: You must install the batteries BEFORE connecting the telephone to the wall jack. If no batteries are stalled, the Caller ID function of the phone will not work.

b. Insert three AA alkaline batteries.

Make sure to install the batteries using the correct polarity(i.e. the "+" symbol on the battery alligns with the "+" symbol on the unit). "SET LANGUAGE" will appear on the display screen. This message will remain on the screen until you install the telephone and then follow the complete Caller ID set-up procedure.

c. Replace the battery door.

7

USING THE PHONE ON A DESK

a.Plug the long telephone line cord into the jack in the bottom of the BASE, thread it through the groove toward the back of the unit, then plug it into the modular wall jack.

b.Connect the COIL CORD to the jack in the HANDSET and the

BASE.

HANGING THE PHONE ON THE WALL

When the FM2552/FM2000 is wall-mounted, the HANDSET GUIDE holds the HANDSET in place in the CRADLE.

ON A WALL PHONE PLATE:

a. Plug the short telephone line cord into the jack in the Base bottom and into the jack on the plate.

b. Hang the BASE on the two pins and push the BASE down to lock it on.

c. Plug the COIL CORD into the HANDSET and BASE jacks.

ON THE WALL WITHOUT A PLATE:

a. Install 2 screws with anchors into the wall, one above the other, 3-1/4" apart, extending 3/16" out from the wall, to hold the base securely.

b. Install the long telephone line cord into the jack in the BASE, thread it through the groove and plug it into the modular wall jack as shown.

c. Hang the base on the screws and pull it down to lock it on.

d. Plug the COIL CORD into the HANDSET and BASE jacks.

8

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Caller ID Telephone With 13-Memory Dialing Important Safety Instructions Congratulations Safety Instructions for BatteriesLocation of Telephone Controls You have purchased a 13 Memory Caller ID TelephoneGeneral Information Location of Caller ID ControlsInstallation To Set Area Code Setting Up Your FM2552/FM2000To Set Contrast Level To a darker or lighter levelTelephone Operation Telephone FeaturesTelephone Features To Program Priority Keys Memory DialingTo Program Frequently Called Numbers Digits maximum. The LCD will showCaller ID Features Caller ID FeaturesTo Dial Priority Numbers To Dial Frequently Called NumbersNew Call LED To Adjust The Display ContrastErase All Calls Problem Possible Cause Corrective Action Trouble Shooting GuideFor in Warranty Service ServiceFor OUT-OF Warranty Service FCC Wants YOU to KnowSouthwestern Bell Freedom Phonehelp Line AT Limited Warranty

FM2552/FM2000 specifications

The Southwestern Bell FM2552/FM2000 represents a significant advancement in telecommunications technology, particularly during the era it was introduced. Designed to provide reliable communication solutions, this model has become a notable choice for many users seeking functionality and performance.

One of the primary features of the FM2552/FM2000 is its robust communication capabilities. It supports multiple channels, allowing for efficient management of calls and connections. This multi-channel functionality is crucial for organizations that require simultaneous communication lines, ensuring that users can conduct business without interruptions. The model's ability to handle various signals enhances its versatility, making it suitable for both personal and professional settings.

In terms of technology, the FM2552/FM2000 incorporates advanced analog and digital processing. This dual approach enables the system to maintain quality sound during calls, reducing interference and enhancing clarity. It is equipped with noise reduction features to improve listener experience, essential in environments with significant background noise. Moreover, the model supports various telecommunication standards, providing flexibility for integration with existing systems.

The FM2552/FM2000 is also characterized by its user-friendly interface. With intuitive controls and a clear display, users can navigate the system effortlessly. Features such as speed dialing and call forwarding add convenience, catering to users who value efficiency. Its compact design allows for easy installation, making it an ideal choice for both home offices and larger corporate environments.

Another notable characteristic is the system's durability and reliability. Built with high-quality materials, the FM2552/FM2000 is engineered to withstand the rigors of daily use. Furthermore, its design minimizes power consumption, reflecting a growing trend towards energy efficiency in modern telecommunications equipment.

Overall, the Southwestern Bell FM2552/FM2000 stands out due to its combination of advanced technology, user-friendly features, and robust construction. It continues to be recognized for its contributions to effective communication, appealing to a broad range of users who value both performance and functionality in their telecommunications solutions. As technology continues to evolve, the FM2552/FM2000 remains a testament to the enduring principles of quality and reliability in the telecommunications industry.
Top Page Image Contents