![](/images/new-backgrounds/1257302/2573025x1.webp)
Using the Organizer for the First Time
Be sure to perform the following operations before using the Organizer for the first time.
1. Pull out the battery insulation sheets from the battery compartment on the back of the unit.
The Organizer starts operation.
(The battery insulation sheets were inserted at the factory to prevent battery wear.)
2.Press the RESET switch.
A message, “RESET?” is displayed.
RESET
3.Tap f, then x.
To tap the touch keys, use the touch pen (included in the package).
The message will appear as “RESET!”.
The Organizer is now initialized. Proceed to set the date and time of the clock (see page 6).
Note:
•Press the RESET switch using the stylus or similar object. Do not use an object with a breakable or sharp tip.
If a malfunction occurs under abnormal conditions
If the Organizer is subjected to strong extraneous electrical noise or shock during use, on rare occasions, all the functions will not work properly and data may be displayed incorrectly. In such cases, follow the procedures as shown below.
1.Press the RESET switch.
2.When a message, "RESET?" is displayed, press any key EXCEPT FOR for x.
If the first procedure doesn't work, follow the next procedure to initialize the Organizer's memory. In this case, all the stored data will be deleted.
1.Press the RESET switch.
2.When a message, "RESET?" is displayed, tap f, then press
x.
1
yo290e_u1u | 1 | 02.6.5, 0:16 PM |