5.Press m.
The End time will automatically change to 30 minutes after the Start time. (However, the End time will remain within the specified day.)
6.Enter 11:00AM for the End time, and press m.
7. Press <or >to select | START : 1 0 | : 0 0 | AM |
“Yes” or “No” for Alarm setting, | END : 1 1 | : 0 0 | AM |
and press m. | ALARM : <YES> |
| |
If you select “Yes”, the Schedule | REM I NDER : |
| |
Alarm will sound at the time set in | 0 0 M I N . BEFORE |
Reminder minutes before the Start time. If you select “No”, Schedule Alarm will not sound.
9.Enter the name of the scheduled item into the PLAN field. (Project meeting)
Up to 96 alphanumeric characters can be entered.
10.Press xto store the schedule listing.
Note:
•When the Home clock time reaches a Reminder time, the Schedule Alarm will sound for approx. 30 seconds even when the power is turned off. Press any key to stop the Alarm sounding. When x is pressed, the listing can be seen in detail in the Schedule mode.
Search
Note:
• If you select “No” in step 7, “PLAN” |
will appear instead. |
END : 1 1 : 0 0 AM
ALARM : <NO >
REM I NDER : – – – – –
Sequential search
1. Press gonce or twice to enter the Schedule mode.
Go step 9 to continue. |
8.Enter the appropriate time for Reminder and press m. Schedule Alarm will sound at the entered time before the Start time. You can select any number from 00 to 99.
Note:
• Enter the number in
0 0 M I N . BEFORE PLAN : 0
END : 1 1 : 0 0 AM
ALARM : <YES>
REM I NDER :
0 5 M I N . BEFORE PLAN : 0
2.Press <or >to search for the target schedule listing. The listings stored in the Organizer will be displayed in chronological order.
8– 1 2 – 2 0 0 3 START : 1 2 : 15 PM END : 1 2 : 4 5 PM ALARM : YES
REM I NDER :
13