3.Select one of the following:
•Place the entire phone with battery attached into the desktop charger, bottom first, so that the data connector is inserted. Then push the phone backward into the support until you hear a click.
4.When the indicator light turns green, remove the phone or battery from the charger. To remove the phone, first pull the phone toward you slightly and then lift up.
•Slide a single battery alone, not attached to the phone, into the base compartment of the desktop charger; first, insert the bottom of the battery under the two tabs of the charger and then push the battery until you hear a click.
You can charge the phone and the single battery together.
3. Initiate your Pocket PC Phone
After charging your Pocket PC Phone, press 
.
If this is the first time you have turned on your Pocket PC Phone, follow the steps in the Welcome Wizard.
6