Perreaux 750 owner manual Ventilation Requirements

Page 8

Ventilation Requirements

Note:

The 750 is a high-powered amplifier. For optimal performance, the unit MUST receive adequate ventilation.

￿Please do not install in a sealed cabinet.

￿Please do not stack products directly on top of the unit.

￿Please do not cover the product with a cloth or similar.

￿Please do not mount the 750 directly onto carpeted surfaces.

￿As a “rule of thumb”, allow 80-100mm (3-4 inches) around all sides of the product and mount the 750 on a flat surface, ensuring that the unit has adequate access to free flowing air.

￿In the event that the 750 is to be incorporated into custom cabinetry, please refer to Chapter 14 “Physical Dimensions”.

Please take all necessary steps to ensure that the unit receives adequate ventilation

8

Image 8
Contents Prisma Page Introducing the Perreaux 750 Power Amplifier Ii Important Safety Instructions Page Table of Contents IiiUnpacking and Placement Ventilation Requirements Instant Install Congratulations Front Panel Functions Rear Panel Functions Fuse Rating Slave Trigger Output Speaker Output Terminals Special Design Philosophies Minimalism in a Wider Context Special Design Features Short-Circuit/Overdrive Protection Maximising System Potential Watts is twice as loud as 75 Watts, not ten times as loud Power Mosfet Audio Applications Secondary Breakdown High Frequency Response Other Advantages Care and Maintenance Warranty Information Obtaining ServiceExtended Warranty Registration FormFaultfinding Your System Identifying Isolating Problems Loudspeakers Preamplifier Faultfinding Flowchart 13Specifications 5VRMSDimensions Dynamic Headroom Physical Dimensions Contact Details Installation Notes