Voice dialing activation.
Voice dialing is always active once you have programmed the phone to accept voice dialing entries.To place voice dialing calls, press and hold 
.Then say the name into the phone after you hear the voice prompt and the beep.
You can also initiate a voice dialing call by opening the flip, when you select this option through the Main Menu.
To change voice dialing setup options:
1.Press 
to display the Main Menu.
2.Press 
for Voice Dial.
3.Press 
for Set Active.
4.Press the scroll keys to toggle between options:
¤Send Only: Enables voice dialing by pressing and
holding 
.
¤Send or Flip: Enables voice dialing by pressing
and
holding 
, or by opening the flip.
5.When the desired option displays, press 
to save the setting.
Placing a call using voice dialing.
To place a call using voice dialing:
1.Press and hold 
, or open the flip, depending on the setting.
2.At the voice prompt, say the name into the phone.
¤The phone places the call if it recognizes the name.
¤If the phone does not recognize the name, it prompts for the name again.
¤If the phone is unable to recognize the name after two attempts, the following message dis- plays:“Cannot recognize name. Please check name.” The phone returns to Standby mode automatically, and you can try the call again later.
Reviewing voice dialing entries.
To review voice dialing entries:
1.Press 
to display the Main Menu.
2.Press 
for Voice Dial.
3.Press 
for Review.A list of entries displays.
4.Press the digit key to select the desired entry, or press the scroll keys to scan entries.The record- ed names play audibly as you scroll through the list.
5.Press 
to return to the previous screen.
46 | 47 |