Cloning Radio Settings
You can copy VL50 radio settings from one radio (the source) to a second radio using the 56531
You can clone only one radio at a time. A
1. On the source radio, press and hold Push to Talk and T for 3 seconds while turning the radio on. The radio beeps and displays k.
2. Place the source radio in one of the charging pockets. 3. Turn the target radio on and place it in the charging pocket that is
paired with the pocket containing the source radio. There are
3 paired charging pockets as indicated by the 3 pairs of charging
status LEDs.
4. Press and hold Ton the source radio. The source radio transmits its
settings to the target radio. If cloning was successful, P or Pass displays on the source radio and the target radio displays all feature
icons. If cloning was not successful, F or Fail displays on the source radio.
5. Turn the target radio off and back on again to use. 6. To clone another radio, repeat steps 3 and 4.
7. To exit programming mode on the source radio, press and hold no longer appears.
Cloning Radio Settings
27