Motorola TA280, T289 manual Lock appears on the display, SeePages36-37forquickoperationsummary

Page 10

Your Talkabout can be programmed to turn itself off after a certain period of inactivity. This feature is used to prevent unwanted battery drain.

Enabling1. Press MenuAutobuttonPowersix timesOff:to enter Power Off feature.

2. Use the Scroll buttons to set the number of hours, after which, the power shuts down (1-8 hours).

Notes:

The radio will return to normal operation mode after 10 seconds or after

 

you press the Push-To-Talk button. If no buttons are pressed during the

 

selected time interval, the radio will sound a unique tone one minute

 

prior to turning itself off.

Minus sign appears on display if Auto Power Off is disabled.

DisplayTalkabout radiosLighthave a backlit display for use in low-light conditions. Press Light/Lock button to illuminate the display. The light will stay on for approxi- mately five seconds.

Pressing other buttons will extend the time the light stays on.

Note:

 

 

Off Power Auto Features

 

 

16

SeePages36-37forquickoperationsummary.

 

 

 

 

KeypadLock allows Lockyou to disable the Scroll, Menu, and Scan buttons so that the radio settings cannot be changed accidentally.

ActivatingPress and hold theFeature:Light/Lock button until

LOCK appears on the display.

Figure 16.

PressDisablingand hold Light/Lock button until LOCK disappears.

Radio emits audible tone to confirm lock and unlock feature activation.

Disabled buttons will beep if pressed (when AlertTones are enabled).

Note:

17

ResThe Resettfeature returns all user programmable features back to the original factory settings.

1. Hold down both the Monitor and Push-To-Talk buttons. Time2. Turn the radio on.

The

-outTimer- feature helps extend battery life and prevents you from

accidently tying up frequencies. The radio will emit a continuous warning tone if the Push-To-Talk button is pressed for 60 continuous seconds and radio will stop transmitting.

Image 10
Contents Page PowerforeButtonYouCanTalk CALL-FCC Page Plug charger into an AC wall outlet. Figure Turn the radio offInsert 3 AA batteries into alkaline tray BeltHolster To ensure proper functioningMotorola Family Service FRS two-way radios operate Normal operating modeCode. The chart Display clearsShow current volume level 1 Power buttonAdjust the radio’s Mode after 2 secondsLock appears on the display SeePages36-37forquickoperationsummaryChannels MenuNel number flashes. Figure Alerted with your Call Tone= Medium Turn radio onUse Scroll buttons to select level = HighHead in your ear, turn down the volume 0LQLPDO5DQJHCheck to make sure volume is turned up Recharge or replace NiMH batteryReceived Ference Eliminator Code settings Conversation on a Active settings are ChannelDamaged ntennas NTN8871 110V NiMH Charging Adapter NTN9150 Battery Battery charger, Radio using the batteryDescription Capacity in milliampere-hour mAH462.6125 462.5625462.5875 462.6375LFHQVH1RW5HTXLUHG Page LJKW/RFN%XWWRQ