Troubleshooting
Symptom | Try This: |
|
|
Message not | Confirm radios have the same channel and interference |
received | eliminator code settings. |
| Make sure M is NOT being pressed while trying to listen. |
| Reposition, replace, or recharge batteries. |
| If QuieT6000 feature is on, transmit call tone before talking. |
| If QuieT6000 feature is on, with only VibraCall ® alert |
| selected, a received call must be acknowledged by pressing |
| any button (or a VOX activation) before the radio can receive |
| any incoming transmissions. |
| Obstructions and operating indoors, or in vehicles, may |
| interfere |
| Verify that the radio is not in Scan mode. |
| Eavesdrop Reducer code is on, or setting does not match |
| other radios; all radios must use the same Eavesdrop |
| Reducer code. |
|
|
52