VTech VT2431 manual Enter Base ID Code, Registration

Getting Started

Enter Base ID Code

1. After charging the Handset, remove it from its Charge Cradle, the screen will display:

2. Press NEW, then enter the 15 digit Base Unit ID code, located on the underside of the Base Unit.

3. Press OK. The Handset will display:

PLEASE WAIT!!

4. Wait approximately 15 seconds. The Handset will display:

FOUND BASE

If the Handset displays: BASE BUSY TRY LATER, this indicates that the system is in use. Wait until the Base Unit is in the idle (on hook) mode, and repeat step 2 to 4.

Congratulations! You can now enjoy the benefits of your VTECH multi-Handset system.

Registration

6