VTech LS6113-WT, LS6113-BK important safety instructions FCC, Acta and IC regulations, FCC Part

Page 44

FCC, ACTA and IC regulations

FCC Part 15

This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep- tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or by- stander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more. If you choose to use a clipping device, please make sure to only use the supplied VTech belt clip.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation.

Privacy of communications may not be ensured when using this telephone.

FCC Part 68 and ACTA

This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your local telephone company upon request.

The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See Installation Instructions in the user’s manual.

The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your local telephone company.

This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equip- ment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited Warranty.

Appendix

www.vtechphones.com

41

Image 44
Contents Congratulations Table of contents Table of contents Installation Parts checklist LS6113-WT/LS6113-BKInstall handset battery Telephone base installation If you subscribe to DSL service Telephone settings Handset layoutTelephone base layout Date and time Ring melodyRing volume Battery low toneOut of range tone Key tonePress MENU/SELECT Edit handset nameLanguage Press or to reach Clr VoiceMail. Press MENU/SELECT Dial typeClear voicemail Reset to default settings Basic operation Make, answer and end callsMute Call waitingTemporary tone dialing Find handsetSearch the directory Advanced operationDirectory Character chart Store a directory entry Dial a directory entryEdit an entry in the directory Delete from the directoryTo delete an entry To delete all entriesAbout caller ID Call log Review the call logDial a call log number Store a call log numberDelete from the call log To delete one entryRedial Review redialStore a redial number to the directory Screen displays enter NamePress /FLASH to dial Dial from redialDelete from redial Handset icons Handset and telephone base indicatorsTelephone base lights Handset display screen messages Display WhenCheck Battery Call log display screen messagesBattery Important safety instructions Troubleshooting Low Battery isCharge light is off in this section 39 for further instructionirst, try all the above suggest ions Make sure the ringer is on BaseLess background noise There is noise Hear other calls when Make sure the telephone line cord is plugged in securelyDisconnect the power to the telephone base Disconnect the battery on the cordless handsetMaintenance Operating rangeWarranty About cordless telephonesHow do you get warranty service? FCC, Acta and IC regulations FCC PartRbrc seal Industry CanadaTechnical specifications Index Page 91-001062-010-100 User’s manual

LS6113-BK, LS6113-WT specifications

The VTech LS6113 is a remarkable addition to the lineup of cordless phones, designed for those who appreciate both functionality and style. Available in two elegant finishes, white (LS6113-WT) and black (LS6113-BK), this phone seamlessly blends with any home décor, ensuring that aesthetics do not compromise performance.

One of the standout features of the LS6113 series is its DECT 6.0 technology. This technology enhances the call quality, providing a secure connection with clearer sound and reduced interference. The DECT 6.0 standard also ensures a longer range, allowing you to move freely throughout your home while maintaining a stable connection.

The LS6113 comes equipped with a large, easy-to-read backlit display. This feature not only enhances visibility in low-light conditions but also simplifies navigation through the phone's various settings, ensuring that users of all ages can operate it with ease. Additionally, the illuminated keypad offers a tactile experience, making dialing and accessing features effortless.

Another notable characteristic of the VTech LS6113 is its ability to store up to 50 contacts in its phonebook. This feature allows users to quickly access important contacts without the hassle of searching manually. The phone also supports caller ID, providing you with the name or number of incoming calls, allowing you to screen calls effectively.

The LS6113 series includes a built-in answering machine with up to 14 minutes of recording time. This convenience ensures that you never miss important messages, and reviewing them is simple and straightforward. The ability to retrieve messages remotely is an added benefit for those on the go.

Battery life is another strength of the VTech LS6113. With a long-lasting rechargeable battery, users can enjoy extended talk times and reduced charging interruptions. The phone also features eco-friendly technology, which lowers power consumption during use and standby mode.

In conclusion, the VTech LS6113-WT and LS6113-BK cordless phones encapsulate a blend of contemporary design and advanced technology. With features such as DECT 6.0 technology, a bright display, an extensive phonebook, and a reliable answering machine, these phones provide excellent functionality for today's busy lifestyles. Whether you prefer the sleek white or the classic black, the LS6113 series stands out as a practical and stylish communication solution.