Getting started
Install an image
1.Perform steps 2 through 9 of the Battery installation and charging procedure on page 3.
2.Use the enclosed template to cut the desired image so that it fits into the transparent image cover.
3.Place the selected image inside the transparent image cover.
4.Place the image face down inside the transparent image cover with the top of the image at the end with the large tab.
5.Replace the transparent image cover by placing it flat against the handset and sliding it towards the CHARGE light until it clicks into place as shown in the figure.
6.Charge the handset by placing it in the telephone base. The handset CHARGE light will be on when correctly placed in the telephone base.
•You can also go to www. vtechphones.com and use the online tool to create your own custom graphic inserts.
Getting started Basic operation
www.vtechphones.com